3.
Install the controller card in an expansion slot.
See "Installing an Expansion Card" in Chapter 8.
4.
Replace the left computer cover.
5.
Connect the tape drive's interface/DC power
cable to the external connector on the controller
card; secure the connection by tightening the
screws on the connector.
9-8
Dell PowerEdge 4100/180 and 4100/200 Systems Installation and Troubleshooting Guide
6.
Reconnect the computer and peripherals to their
power sources, and turn them on.
7.
Perform a tape backup and verification test with
the drive as instructed in the tape-drive software
documentation that came with the drive.