Table of Contents
Advertisement
en Familiarising yourself with your appliance
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
Note: On certain models, specific details such as col-
our and shape may differ from those pictured.
4
1
4.2 Buttons
Use the buttons on the left- and right-hand side of the control panel to switch your device or the operating mode on
and off.
Button
Function
On/off
Menu
Information
Childproof lock
Time-setting options
Rapid heat-up
Start/stop
Field to the left of the dis-
play
Field to the right of the
display
4.3 Rotary selector
Use the rotary selector to change the setting values
that are shown in the display.
If you have reached the minimum or maximum value
for setting values, e.g. the temperature, this value re-
mains in the display. If required, use the rotary selector
to turn the value back again.
For lists, e.g. the types of heating, the first value starts
again after the last value.
6
3
4
2
1
Use
Switch the appliance on or off.
Open the operating mode menu
Display notifications Activate and deactivate the childproof lock
Activate and deactivate the childproof lock
Press briefly: Start or pause operation.
Press and hold for approx. three seconds: Cancel operation.
Switch rapid heat-up on and off
Start, pause or cancel the operation
Navigation to the left
Navigation to the right
1
Buttons
The buttons on the left- and right-hand side of
the control panel have a pressure point. Press
a button to execute its function. On appliances
without a stainless steel front, the buttons are
also touch fields.
2
Rotary selector
You can turn the rotary selector without limits
clockwise or anti-clockwise.
Touch fields are touch-sensitive surfaces. To
select a function, simply press lightly on the rel-
evant field.
3
Display
The display shows the current setting values or
notification texts.
Touch fields
4
Touch fields are touch-sensitive surfaces. To
select a function, simply press lightly on the rel-
evant field.
4.4 Display
The display shows the current setting values.
The value that you can change in the display is high-
lighted in colour.
Status bar
The status bar is at the top of the display.
The time and set time functions are shown in the status
bar.
Progress line
The line is shown in the display below the highlighted
value.
Advertisement
Table of Contents
