Graphics Card; Removing The Graphics Card - Dell OptiPlex 5090 Service Manual

Steps
1. Place the fan and heat-sink assembly onto the system board.
2. Tighten the captive screws that secure the fan and heat-sink assembly to the system board.
3. Connect the fan cable to the connector on the system board.
Next steps
1. Install the front bezel.
2. Install the side cover.
3. Follow the procedure in

Graphics card

Removing the graphics card

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the graphics card and provide a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components 39