Related Manuals for Huawei LampSite
Summary of Contents for Huawei LampSite
- Page 1 LampSite Solution Product Description Issue Date 2013-11-30 HUAWEI TECHNOLOGIES CO., LTD.
- Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
-
Page 3: Table Of Contents
5.2.2 pRRU3901 Specifications ........................23 5.3 Environment Requirements ..........................23 5.4 Standard Compliance ............................. 24 A Acronyms and Abbreviations ....................25 1 Introduction............................ 1 1.1 Positioning ............................... 1 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. - Page 4 5.2 Physical Specifications ........................... 22 5.2.1 RHUB3908 Specifications ........................22 5.2.2 pRRU3901 Specifications ........................23 5.3 Environment Requirements ..........................23 5.4 Standard Compliance ............................. 24 A Acronyms and Abbreviations ....................25 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
-
Page 5: Introduction
The pRRU has a modular design and supports flexible multi-mode configurations. The LampSite solution is managed by the same operations support system (OSS) as the macro network, and the entire network achieves E2E management. 01 (2013-11-30) Huawei Proprietary and Confidential... - Page 6 Cells can be split to expand system capacity. The LampSite solution produces little background noise and has a high access success rate and a low call drop rate. The LampSite solution supports CPRI-MUX convergence and CPRI compression.
-
Page 7: Hardware Architecture
Hardware Architecture 2.1 Overview 2.1.1 Product Architecture In the LampSite solution, the base station comprises the baseband unit (BBU), pico remote radio unit (pRRU), and RRU HUB (RHUB). These modules can be flexibly combined to meet different scenario requirements. Figure 2-1 shows the product architecture of the LampSite solution in UMTS, LTE, or UMTS+LTE mode. - Page 8 RF daughter boards at different modes to support multimode applications. The connection principles for the LampSite solution are as follows: ...
-
Page 9: Typical Configurations
LampSite Solution Product Description 2 Hardware Architecture 2.1.2 Typical Configurations Table 2-1 shows typical configurations of the LampSite solution in a single-mode network. Table 2-1 Typical configurations of the LampSite solution in a single-mode network Mode Typical Configurations Number of... -
Page 10: Bbu3900
In the uplink, the RHUB3908 converges the data from pRRUs and sends the data to the BBU. The internal PoE module in the RHUB3908 provides power to the pRRU. 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. -
Page 11: Rhub3908 Exterior
2 Hardware Architecture 2.3.1 RHUB3908 Exterior Figure 2-2 shows the RHUB3908 exterior. Figure 2-2 RHUB3908 exterior Figure 2-3 provides the dimensions of the RHUB3908. Figure 2-3 RHUB3908 dimensions 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. -
Page 12: Rhub3908 Ports
Hardware reset button for initializing configurations Ground screw Used for connecting PGND cables. If PGND cables use a one-hole OT terminal, connect them to the ground screws at the bottom of the panel. 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. - Page 13 PHS feature Steady off No data has been transmitted or received. is enabled. PWR0~7 Yellow Steady on The RHUB is supplying power to the pRRU properly. 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
-
Page 14: Psu
The buckle and handle are used to physically install the PSU in the RHUB box. Figure 2-6 shows the PSU indicators. Figure 2-6 PSU indicators 1. Power supply indicator 2. Alarm indicator 3. Fault indicator 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. - Page 15 PSU. There is no input Replace the PSU. because the PSU is faulty. The PSU is functioning This status is normal Steady off properly. and requires no handling. 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
-
Page 16: Prru3901 Equipment
Flexible multi-mode configurations, with built-in RF cards for multiple radio access technologies (RATs) A pRRU supports only two RF cards in the current version. 2.4.1 pRRU3901 Exterior Figure 2-7 shows the pRRU3901 exterior. Figure 2-7 pRRU3901 exterior 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. -
Page 17: Prru3901 Ports
This section describes the ports and indicators on the pRRU3901 panels. Figure 2-9 shows the ports and indicators on the pRRU3901. Figure 2-9 Ports and indicators on the pRRU3901 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. - Page 18 Table 2-7 describes the pRRU3901 indicators. Table 2-7 pRRU3901 indicators Indicator Color Status Description Green Steady on The power supply is connected, but the pRRU is faulty. 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
- Page 19 Steady red The RU3 card is faulty. CPRI_E0 Green Steady on The CPRI link is functioning properly. Steady off The CPRI link is not functioning properly or faulty. 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
- Page 20 2 Hardware Architecture Indicator Color Status Description CPRI_E1 Green Steady on The CPRI link is functioning properly. Steady off The CPRI link is not functioning properly or faulty. 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
-
Page 21: Installation And Application Scenarios
The pRRU3901 can be installed on a wall or ceiling. 3.2 Application Scenarios The LampSite solution provides indoor coverage to indoor areas with high traffic, such as office buildings, shopping malls, bars, hotels, and parking lots. Because RHUB3908 and pRRU3901 are compact and light, they can be installed anywhere indoors. - Page 22 LampSite Solution Product Description 3 Installation and Application Scenarios Figure 3-1 Example of the LampSite 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
-
Page 23: Om System
4 OM System OM System The LampSite solution is applicable to the operation and maintenance (OM) system that is based on the Man Machine Language (MML) and the Graphic User Interface (GUI). The OM system enables a hardware-independent OM mechanism and provides powerful OM functions to meet various OM requirements. - Page 24 Maintenance personnel can maintain base stations locally using the SRAN LMT or remotely using the remote maintenance channel. M2000: As the network management center of Huawei, the M2000 centrally maintains multiple base stations. The M2000 is a platform from which users can configure data (from the CME), monitor alarms and performance, upgrade software, and manage inventory.
-
Page 25: Technical Specifications
UMTS 1T1R/1T2 2 carriers -112 1 carrier: 1 x 200 2 carriers: 80 mW per carrier in 11 or 1001 configuration 40 mW per carrier in 101 configuration 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. -
Page 26: Physical Specifications
Transmission Eight FE/GE electrical ports port Two FE/GE optical ports Power < 1000 W consumption Power supply 8x90 W: A CPRI_E provides a power supply of 90 W. 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. -
Page 27: Prru3901 Specifications
YD5083-99: Interim Provisions for Test of Anti-seismic Performance of Telecommunications Equipment (telecom industry standard in the People's Republic of China) GR63 5.4.1 zone4: NEBS Requirements: Physical Protection 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. -
Page 28: Standard Compliance
ETSI EN301 489 ITU-T K.20 Safety Standards IEC60950 Environment standard ETSI EN 300 019-2-1 ETSI EN 300 019-2-2 ETSI EN 300 019-2-3 IEC 60068-2 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. -
Page 29: A Acronyms And Abbreviations
Multiple Input Multiple Output Multimode Base Station MBTS Power Supply Unit pico Remote Radio Unit pRRU Radio frequency RHUB RRU HUB Software Defined Radio UMTS Universal Mobile Telecommunications System 01 (2013-11-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.