Huawei CX600-8 Hardware Description page 121

HUAWEI CX600-8/16/X3/X8/X16 Metro Service Platform
Hardware Description
Indicator/
Button
OFL indicator
(red)
RUN indicator
(green)
ALM indicator
(red)
ACT active/
standby indicator
(green)
Reset button
CF ACT indicator
(green)
CF OFL button
SFP LINK/ACT
indicator (green)
MGMT-ETH
LINK indicator
(green) (on
Ethernet
interfaces)
MGMT-ETH
ACT indicator
(amber) (on
Ethernet network
interfaces)
Table 4-18
Issue 03 (2013-11-30)
Description
If the indicator is on, you can remove the board.
If the indicator blinks once every two seconds (0.5 Hz), the system is in
the normal state.
If the indicator blinks twice each second (2 Hz), the system is in the
alarm state.
If the indicator is steady on, the system is in the alarm state.
If the indicator is steady off, the system is in the normal state.
If the indicator is steady on, the SRU is in the active state.
If the indicator is off, the SRU is in the standby state.
If you press the Reset button, you can reset the main control unit on the
SRU.
If the indicator is on, the CF is in position.
If the indicator is blinking, data is being read or written.
If the indicator is off, the CF is not in position or can be removed.
If you press the CF OFL button, all operations on the CF card will be
ended and the CF card will be powered off.
If the indicator is steady on, the link is normal.
If the indicator is blinking, data is being transmitted.
If the indicator is steady on, the link is normal.
If the indicator is off, the link is Down.
If the indicator is blinking, data is being transmitted.
If the indicator is off, no data is being transmitted.
lists the interfaces on the SRU and their uses.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 CX600-X8
102