Huawei CX600-8 Hardware Description page 129

HUAWEI CX600-8/16/X3/X8/X16 Metro Service Platform
Hardware Description
Table 4-28 1000MBase-X-SFP interface attributes
Attribute
Connector type
Operation mode
Standard
compliance
Cable
specification
Table 4-29
Table 4-29 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes
Attribute
Connector type
Operation mode
Standard
compliance
Cable
specification
Table 4-30
Table 4-30 Console interface attributes
Attribute
Connector type
Operation mode
Electrical
attribute
Baud rate
Data equipment
type
Issue 03 (2013-11-30)
Description
SFP
1000 M fiber
IEEE 802.3-2002
Single-mode or multi-mode fibers
lists the 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes.
Description
RJ45
10M/100M/1000M auto-sensing interfaces, supporting half-duplex and
full-duplex modes
IEEE 802.3-2002
Category 5 unshielded twisted pair (UTP) cables recommended when the
interface rate is 10 Mbit/s or 100 Mbit/s; super category 5 Shielded
Twisted Pair (STP) cables recommended when the interface rate is 1000
Mbit/s
lists the console interface attributes.
Description
RJ45
Duplex Universal Asynchronous Receiver/Transmitter (UART)
RS-232
9600 bit/s (default value), which can be changed as required
DCE (Data Circuit-terminating Equipment)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 CX600-X8
110