To obtain up-to-date information and/or specifications, contact your Fujitsu sales representative or Fujitsu authorized dealer. 2. Fujitsu will not be liable for infringement of copyright, industrial property right, or other rights of a third party caused by the use of information or drawings described in this manual.
LQFP80 PGM ADAPTOR V1.0 Chapter 1 Introduction 1 Introduction The MB95310 LQFP80 PGM adapter is developed mainly as an independent on-board programming and debugging tool for MB95310 series LQFP80 package MCU. Its original function of programming and debugging after being installed on the MB95310 series EV board still remains.
LQFP80 PGM ADAPTOR V1.0 Chapter 2 Application Environment 2 Application Environment This chapter introduces application environment of MB95310 LQFP80 PGM adaptor. 2.1 Mother Board The mother board of MB95310 LQFP32 PGM adaptor is MB95310 EV board V1.1, as below picture. It can be gotten from MB95310 LCD EV Board (PN: MB2146-450-E). Figure 2.1: MB95310 EV Board V1.1 2.2 Debug Tool The debug tool is BGMA (BGM Adaptor), the type of it is MB2146-08-E, as below picture.
F2MC-8L/8FX SOFTUNE Workbench V30L31, as below picture. It can be downloaded from the following website. Web: http: //www.fujitsu.com/cn/fmc/service/mcu/tools. Figure 2.3: SOFTUNE Version 2.4 USB Programmer The MB95310 series USB programmer is not support by far and will be updated later.
LQFP80 PGM ADAPTOR V1.0 Chapter 3 Hardware Connection 3 Hardware Connection This chapter introduces hardware connection when it is used independently or with mother board. MB95310 LQFP32 PGM adaptor can be used to program and debug independently or after being installed to the mother board. Hardware preparations for each case are described in Section 3.1and Section 3.2 respectively.
Page 8
LQFP80 PGM ADAPTOR V1.0 Chapter 3 Hardware Connection (1) Connect BGMA to PC Connect PGM adaptor board to BGMA Power on the PGM adaptor board, the typical input voltage is 3.3V Figure 3.2: Hardware Connection for Independent Usage MCU-AN-500068-E-10– Page 8...
LQFP80 PGM ADAPTOR V1.0 Chapter 3 Hardware Connection 3.2 Used with Mother Board (1) MB95310 series EV board V1.1 is the mother board of LQFP80 PGM adaptor board. First remove the MB95310 chip mounted on the mother board. Remove MCU Figure 3.3: Remove MCU from Mother Board MCU-AN-500068-E-10–...
Page 10
LQFP80 PGM ADAPTOR V1.0 Chapter 3 Hardware Connection (2) Install the MB95F310 chip onto the adaptor socket. Figure 3.4: Place MCU on Adaptor Board (3) Fix the adaptor board to the mother board. Figure 3.5: Fix Adaptor Board on the Mother Board MCU-AN-500068-E-10–...
Page 11
LQFP80 PGM ADAPTOR V1.0 Chapter 3 Hardware Connection (4) Connect BGMA to PC. (5) Connect PGM adaptor board to BGMA. (6) Power on the EV-board. Figure 3.6: Process (4)-(6) MCU-AN-500068-E-10– Page 11...
LQFP80 PGM ADAPTOR V1.0 Chapter 4 Program Function 4 Program Function This chapter introduces programming steps using either MB95310 series USB programmer or F MC-8L/8FX SOFTUNE Workbench V30L31. MB95310 series MCU can be programmed through MB95310 series USB programmer or MC-8L/8FX SOFTUNE Workbench V30L31.
Page 13
LQFP80 PGM ADAPTOR V1.0 Chapter 4 Program Function (2) Please select the MCU type to MB95F310 in “Project/Setup Project…/MCU”. Select MCU Figure 4.4: Set MCU Type (3) In “Project/Setup Project…/Linker”, set “Disposition/Connection” in Category, then select _INROM01 and click “Set Section…” After that, a dialog window will pop up as shown in Figure 4.6 below.
Page 15
LQFP80 PGM ADAPTOR V1.0 Chapter 4 Program Function (3.5) set section name (3.6) Click (3.4) Select Figure 4.7: Set Const Section (3.8) set section name (3.9) Click (3.7) Select Figure 4.8: Set Dirconst Section MCU-AN-500068-E-10– Page 15...
Page 16
LQFP80 PGM ADAPTOR V1.0 Chapter 4 Program Function (4) Compile project. (5) Start debugging. Figure 4.9: Start Debugging (6) Run (code update). (7) End debugging. Notes: SOFTUNE environment can also be used to debug, however if users only need to do programming, DO NOT set any breakpoint before step 6, or error code will be programmed.
LQFP80 PGM ADAPTOR V1.0 Chapter 6 PN Definition Rule 6 PN Definition Rule The part number of PGM adaptor is FMCDC-8FX-PGMA-07080050. 07 LQFP, 080 Pin count (e.g. 080 means 80 pin MCU), Lead pitch (e.g. 0.50mm means lead pitch 050). MCU-AN-500068-E-10–...
LQFP80 PGM ADAPTOR V1.0 Chapter 7 PN List of Applicable MCUs 7 PN List of Applicable MCUs MCU Series Part Number Footprint MB95310 series MB95F314E LQFP80 MB95F314L MB95F316E MB95F316L MB95F318E MB95F318L MCU-AN-500068-E-10– Page 19...
LQFP80 PGM ADAPTOR V1.0 Chapter 8 More Information 8 More Information For more information on FUJITSU MB95310 products, please visit the following website: Simplified Chinese Version http://www.fujitsu.com/cn/fmc English Version http://www.fujitsu.com/cn/fmc/en MCU-AN-500068-E-10– Page 20...