LQFP80 PGM ADAPTOR V1.0
Chapter 4 Program Function
4 Program Function
This chapter introduces programming steps using either MB95310 series USB programmer
2
or F
MC-8L/8FX SOFTUNE Workbench V30L31.
MB95310 series MCU can be programmed through MB95310 series USB programmer or
2
F
MC-8L/8FX SOFTUNE Workbench V30L31. Section 4.1 and section 4.2 introduce
2
programming steps with MB95310 series USB programmer and F
MC-8L/8FX SOFTUNE
Workbench V30L31 respectively.
4.1 Use MB95310 Series USB Programmer to Program
This function is not support by far and will be updated later.
2
4.2 Use F
MC-8L/8FX SOFTUNE to Program
(1) Open a project (E.g. MB95F310 LCD EV-Board project) using SOFTUNE.
Figure 4.3: Open Demo Project
MCU-AN-500068-E-10– Page 12