Front Brake Lever - Yamaha YW50A Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Dimmer switch "&/%"
Set this switch to "&" for the high
beam and to "%" for the low beam.
1
Turn signal switch "4/6"
2
To signal a right-hand turn, push this
switch to "6". To signal a left-hand
turn, push this switch to "4". When
3
released, the switch returns to the
center position. To cancel the turn
4
signal lights, push the switch in after it
has returned to the center position.
5
Horn switch "*"
6
Press this switch to sound the horn.
7
Engine stop switch "#/$"
Set this switch to "#" before starting
8
the engine. Set this switch to "$" to
stop the engine in case of an emer-
gency, such as when the vehicle
9
overturns or when the throttle cable is
stuck.
EAU12400
Start switch ","
Push this switch to crank the engine
with the starter. See page 5-1 for
starting instructions prior to starting
EAU12460
the engine.
EAU12500
EAU12660
EAU12711

Front brake lever

ZAUM00**
1. Front brake lever
The front brake lever is located on
the right handlebar grip. To apply the
front brake, pull this lever toward the
handlebar grip.
3-4
EAU1044E
EAU12900
1