Wiring
3.1
Wiring and block diagram
This section contains the block diagram of the module and the terminal assignment.
Wiring and block diagram
The following figure shows the terminal assignment and the assignment of the channels.
• Inputs: Channel 0 to 31 to connector X10.
• Outputs: Channel 0 to 31 to connector X11.
①
Backplane bus interface
②
Connection type sinking
③
Connection type sourcing
Figure 3-1
Block diagram and terminal assignment
Digital input/output module DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA (6ES7523-1BP50-0AA0)
Equipment Manual, 07/2020, A5E48027024-AA
CHx
Channel
RUN
Status display LED (green)
ERROR
Error display LED (red)
3
11