Upgrade Instructions; Upgrade Using Cli (Via Telnet) - D-Link DGS-1210-28P Manual

Revision History and System Requirement:
Firmware Version
Runtime: v4.00.B055
Boot: 1.00.012
Runtime: v4.00.B053
Boot: 1.00.012
Runtime: v4.00.B052
Boot: 1.00.012
Runtime: v4.00.B049
Boot: 1.00.012
Runtime: v4.00.B046
Boot: 1.00.012
Runtime: v4.00.B045
Boot: 1.00.012
Runtime: v4.00.043
Boot: 1.00.012
Runtime: v4.00.B042
Boot: 1.00.010
Runtime: v4.00.B039
Boot: 1.00.010
Runtime: v4.00.024
Boot: 1.00.010

Upgrade Instructions:

D-Link Smart Switches support firmware upgrade via TFTP server. You can download the firmware
from D-Link web site http://tsd.dlink.com.tw, and copy the downloaded firmware to the TFTP
server folder. Please make sure that the TFTP server is accessible from the switch via networks.

Upgrade using CLI (via Telnet)

1. Make sure the network connection between the switch and PC is active.
2. Use software that supports telnet, for example, HyperTerminal or Telnet command in Microsoft
Windows, to connect to the switch. If you are using Telnet command, type the command followed
by the switch IP address, eg. telnet 10.90.90.90.
3. The logon prompt will appear.
The switch will prompt the user to enter his/her username and password. It should be noted that
DGS-1210-28P Firmware Release Notes
Date Model
04- Sep.-14 DGS-1210-28P
19- Aug.-14 DGS-1210-28P
13- Aug.-14 DGS-1210-28P
29- July.-14 DGS-1210-28P
18- June.-14 DGS-1210-28P
08- May.-14 DGS-1210-28P
17- Mar.-14 DGS-1210-28P
13- Mar.-14 DGS-1210-28P
06- Feb.-14 DGS-1210-28P
05- Nov.-13 DGS-1210-28P
2
Hardware Version
C1
C1
C1
C1
C1
C1
C1
C1
C1
C1