Upgrade Using Web-Ui - D-Link DGS-1210-28P Manual

upon the initial connection, both the default user name and password are admin.
To upgrade the switch firmware, execute the following command:
Command
download{firmware_fromTFTP
tftp://ip-address/filename | cfg_fromTFTP
tftp://ip-address/filename}
When completing firmware upgrade, the following messages will pop up.
Device will reboot after firmware upgraded successfully
Image upgraded successfully
4. Execute the following command to check the firmware version and switch's information.
Command
show switch
Example:
1. DGS-1210-28P:
Command: download firmware_fromTFTP tftp://10.90.90.91
DGS-1210-28P-C1-4-00-024hex
Device will reboot after firmware upgraded successfully
Image upgraded successfully
2. DGS-1210-28P:
Command: show switch
DGS-1210-28P> show switch
System name
System Contact
System Location
System up time
System Time
System hardware version
System firmware version
System boot version
System serial number
MAC Address

Upgrade using Web-UI

1. Connect a workstation installed with java SE runtime environment to any switch port of the
DGS-1210-28P Firmware Release Notes
:
:
:
: 0 days, 0 hrs, 36 min, 56 secs
: 01/01/2013 01:01:55
: C1
: 4.00.024
: 1.00.010
: 1MB1733K0000A
: 00-87-87-AB-88-77
3
Function
Download firmware file from the TFTP
server to the switch.
Function
Display the information of current
firmware and boot version.