Panasonic VL-SWD273 Quick Start Manual page 2

Model Composition
VL-SWD273
VL-SVD273
Specifications
VL-MWD273
Model number and name
Main Monitor Station (Main monitor)
Extension Monitor
*1
Up to 3
(not including the main monitor)
Dimensions
(mm)
Power supply unit (VL-PS241)
Power source
24 V DC, 0.5 A
Standby: Approx. 1.8 W
Power consumption
During operation: Approx. 11.6 W
Dimensions (H x W x D)
158 x 243 x 29.5 mm
(Excluding protruding sections)
Weight
Ambient temperature: Approx. 0 °C to +40 °C
Operating environment
Relative humidity (non-condensing): up to 90 %
Display 7-inch wide colour / WVGA (800x480 pixels)
Display language English, Arabic
Talking method
Frequency range 1.88 GHz to 1.90 GHz
Viewing angle
Image sensor / camera (pixel)
Installation method
(mounting bracket supplied)
Minimum illuminance required
Lighting method
Transmitting range
IP rating / IK rating
Flame retardant PC+ABS resin,
External material
Flame retardant ABS resin
*1 When sub monitors and extension monitors are used together, a total of up to 6 sub monitors and extension monitors can be registered.
*2 Water resistance is only assured if the doorphone is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken.
Installing the Doorphone
• VL-V554 (Surface mount)
Screw × 2
Mounting base
(accessory)
Wire (locally procured)
Install the mounting base on a vertical flat wall.
Installing the Main Monitor/Extension Monitor
Mounting bracket
Vertical, flat wall
Hole in wall
60 mm
Screws
83.5 mm
7 mm
50 mm
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
DISTRIBUTED BY :
VL-MWD273 x 1, VL-V554 x 1, VL-WD613 x 1, VL-PS241 x 1
VL-MWD273 x 1, VL-V554 x 1, VL-PS241 x 1 (VL-WD613 sold separately)
VL-PS241
Power supply unit
100
243
29.5
158
Input: 220-240 V AC, 0.2 A, 50/60 Hz
Output: 24 V DC, 0.6 A
-
104 x 100 x 54 mm
710 g 215 g
Ambient temperature: Approx. 0 °C to +50 °C
Relative humidity (non-condensing): up to 90 %
-
-
Hands-free -
-
- -
- -
Wall mount
Wall mount or attach to DIN rail
- -
- -
- -
- -
Flame retardant PC+ABS resin
83.5 mm
Wall
243 mm
Mounting
bracket
Main
Monitor
VL-V554
VL-V554U
Door Station (Doorphone)
Up to 2
118
30
54
169
104
Power supplied by the main monitor
20 V DC, 0.23 A
-
VL-V554: 169 x 118 x 30 mm
VL-V554U: 169 x 118 x 16.5 mm
(excluding sections embedded into the wall)
VL-V554: 405 g
VL-V554U: 345 g
Ambient temperature: Approx. -15 °C to +50 °C
Relative humidity (non-condensing): up to 90 %
(tested up to -20 °C)
-
-
-
-
Horizontally: Approx. 170˚
Vertically: Approx. 115˚
CMOS sensor (Approx. 1.0 M pixels)
VL-V554: surface mount
(mounting base supplied)
VL-V554U: Flush mount
(Flush mounting box supplied)
1 lx
(within approx. 50 cm from the camera lens)
Warm white coloured LED lights,
Infrared LEDs
-
*2
IP54 / Compliant with IK07
Aluminium and flame retardant
PC+PS resin
• Installation Position
Side View
Approx. 110°
Centre of
doorphone
Approx. 1,450
Approx. 500
Installing the Power Supply Unit
Front View
58 mm
158 mm
83.5 mm
Remove the screw
on the cable cover.
VL-WD613
Wireless Monitor Station
(Sub monitor)
*1
Up to 6 Up to 2
52
30
81
76
173
43
Main body Charger
Main body:
Rechargeable Ni-MH (AAA x 2)
AC adaptor (PQLV219)
Charger:
Input: 220-240 V AC, 0.1 A, 50/60 Hz
AC adaptor (PNLV226)
Output: 6.5 V DC, 0.5 A
Input: 220-240 V AC, 0.1 A, 50/60 Hz
Output: 5.5 V DC, 0.5 A
Standby: 0.5 W (when the sub Standby: Approx. 1.5 W
monitor is not placed in the charger) During operation: Approx. 2.3 W
During operation: 1.6 W
Main body: 173 x 52 x 30 mm
Charger: 43 x 81 x 76 mm
Main body: 160 g (including the batteries)
88 g (excluding the AC adaptor)
Charger: 70 g (excluding the AC adaptor)
Ambient temperature: Approx. 0 °C to +40 °C Ambient temperature: Approx. 0 °C to +40 °C
Relative humidity (non-condensing): up to 90 % Relative humidity (non-condensing): up to 90 %
2.2-inch colour / QVGA (320x240 pixels)
English, Arabic
Hands-free
1.88 GHz to 1.90 GHz 1.88 GHz to 1.90 GHz
-
-
-
-
-
Approx. 100 m (line-of-sight distance Approx. 100 m (line-of-sight distance
from the main monitor) from the main monitor)
-
ABS resin
Image range
Top View
Approx. 2,150
Approx. 1,400
Approx. 170°
Approx. 750
Top View
AC cable
AC IN connector
Bottom View
DC cable
DC cable DC OUT
binder hole terminal
• The actual product may vary slightly from photograph.
• Weights and dimensions are approximate.
• Design and Specifications are subject to change without notice.
• These products may be subject to export control regulations.
MG-DHPL023EN 1705TD/ZZZ-AU1
VL-FKD2
DECT Repeater
111
82
39
(when transmitting)
82 x 111 x 39 mm
-
-
-
-
-
-
-
-
-
PS resin
Approx. 500
DC Cable
25 mm
7 mm