Table of Contents
Advertisement
PAMS Technical Documentation
Emergency number 1 (911)
Emergency number 2 (*911)
Emergency number 3 (None)
14 If you wish to change the displayed value, use the Scroll key to select the emer-
gency number you wish to change and press [Select]. Then use the numeric keys
to enter the new values
15 To save the value, press the softkey [OK].
16 Press [Back] to exit the menu.
Serial Number (ESN):
17 From the Main Menu, use the Scroll key to display the "Serial No." or ESN of the
phone.
18 Press [Back] to exit the menu.
Programmed: (Date the phone is first programmed)
19 From the Main Menu, use the key to display the "Programmed" menu.
20 Press [Select] and enter a four digit number that corresponds to the month and
year the phone is sold. Example (mmyy)
0199 = January 1999, 0401 = April 2001.
NOTE: This menu location can be programmed only one time. Once the date has been entered it
cannot be changed. Any attempt to enter the menu once it has been programmed will receive a short
beep and the message "Date already saved".
Exiting NAM Programming:
21 To exit the NAM programming mode, turn the phone off and leave it off for five
seconds.
Field test:
The Field Test Display Mode is used to investigate how the phone and the cellular net-
work are interfacing together.
The Field Test Display Mode reports valuable information about the signal strength, bat-
tery charging status, cellular state, and encryption status.
The information is organized to display information relating to Analog Control Channels,
Digital Control Channels, Analog Voice Channels, and Digital Voice channels. All the
information provided in this display is in accordance with IS-136.
To activate the Field Test Display Mode you must be in NAM programming. Instructions
for entering NAM programming are on the previous pages.
Issue 4 03/01
General Information and NAM Programming
Nokia Mobile Phones Ltd.
NSC-1
Page 17
Advertisement
Table of Contents
