Specifications - Sony LBT-LCD77Di Operating Instructions Manual

Specifications

Main unit
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(North American model only)
With 6 ohm loads, both channels driven,
from 120  10,000 Hz; rated 85 watts per
channel minimum RMS power, with no
more than 1% total harmonic distortion
from 800 milliwatts to rated output.
Amplifier section
North American model:
RMS output power (reference):
210 W + 210 W (per channel at 6 Ω,
1 kHz)
Other models:
The following measured at AC 240 V,
50/60 Hz
Power output (rated):
105 W + 105 W (at 6 Ω, 1 kHz, 1%
THD)
RMS output power (reference):
210 W + 210 W (per channel at 6 Ω,
1 kHz)
Inputs
VIDEO/SAT VIDEO IN (phono jack):
1 Vp-p, 75 Ω
VIDEO/SAT AUDIO IN L/R (phono jacks):
voltage 250/450 mV, impedance
47 kΩ
MIC (phone jack):
sensitivity 1 mV, impedance 10 kΩ
Outputs
VIDEO OUT (phono jack):
max. output level 1 Vp-p, unbalanced,
Sync negative, load impedance 75 Ω
COMPONENT VIDEO OUT
Y: 1 Vp-p, 75 Ω
Pb: 0.7 Vp-p, 75 Ω
Pr: 0.7 Vp-p, 75 Ω
DVD DIGITAL OUT (Square optical
connector jack, rear panel):
Wavelength 650 nm
PHONES (stereo mini jack):
accepts headphones of 8 Ω or more
SUBWOOFER OUT:
Voltage 1 V, impedance 1 kΩ
SPEAKERS
MHC-GZR333i:
Use only the supplied speaker
SS-GZR777D.
LBT-LCD77Di:
Use only the supplied speaker
SS-LCD77DI.
(USB) port: Type A
Maximum current:
500 mA

Continued
1
GB