Recording Analog Audio To A Usb Device - Sony LBT-LCD77Di Operating Instructions Manual

Recording analog
audio to a USB device
You can record the sound from analog
audio sources. The sound is recorded as
128 kbps MP3 file.
1
Connect the USB device to the
(USB) port.
2
Press FUNCTION +/ repeatedly
to select the desired source.
 TUNER FM/AM: To record from
this system's tuner.
 VIDEO/SAT: To record from the
optional component connected to
the VIDEO/SAT AUDIO IN L/R
jacks.
3
Press REC TO USB on the unit.
"Please Wait" appears and the display
cycles between "Free xx.x GB" (free
space on the USB device) and "Push
Enter. "
The USB device stands by for
recording.
7
GB
4
Start playing the desired source
to record, then press ENTER.
To stop recording
Press .
To remove the USB device
1
Press  to stop recording.
2
Press  to turn off the system.
3
Remove the USB device.
To mark track numbers
You can mark the track numbers during
recording of any source.
Press REC TO USB on the unit at the
point you want to add a track mark.
The system pauses recording for a few
seconds and adds track mark, showing
message "New Track. " No sound is
recorded during pause time.
Note
The track numbers are automatically marked
when you record more than 60 minutes.