Related Manuals for Electrolux ELAI3 Series
Summary of Contents for Electrolux ELAI3 Series
- Page 1 Under Counter dishwasher User manual * 59566UL00- 2021.03 *Original instructions...
- Page 2 Foreword The installation, use and maintenance manual (hereinafter Manual) provides the user with information necessary for correct and safe use of the machine (or “appliance“). The following must not be considered a long and exacting list of warnings, but rather a set of instructions suitable for improving machine performance in every respect and, above all, preventing injury to persons and animals and damage to property due to im- proper operating procedures.
-
Page 3: Table Of Contents
Contents A SAFETY INFORMATION ......................... 5 General information ........................5 General safety ..........................5 Personal protection equipment ......................6 Water connection.......................... 6 Electrical connection ........................6 Machine cleaning and maintenance....................7 Machine disposal.......................... 7 B GENERAL SAFETY INSTRUCTIONS FOR USA MARKET ................8 General information ........................ - Page 4 M TROUBLESHOOTING .......................... 24 General troubleshooting....................... 24 Alarms ............................. 25...
-
Page 5: Asafety Information
SAFETY INFORMATION General information To ensure safe use of the machine and a proper understanding of the manual it is necessary to be familiar with the terms and typographical conventions used in the documentation. The following symbols are used in the manual to indicate and identify the various types of hazards: WARNING Danger for the health and safety of operators. -
Page 6: Personal Protection Equipment
Personal protection equipment Summary table of the Personal Protection Equipment (PPE) to be used during the various stages of the machine's service life. Stage Protective Safety Gloves Glasses Safety garments footwear helmet ● ○ ○ — — Transport ● ● ○... -
Page 7: Machine Cleaning And Maintenance
• If the power cable is damaged it must be replaced by the Customer Care Service or in any case by specialised personnel, in order to prevent any risk. Machine cleaning and maintenance • Refer to “A.3 Personal protection equipment“ for suitable personal protection equipment. •... -
Page 8: Bgeneral Safety Instructions For Usa Market
GENERAL SAFETY INSTRUCTIONS FOR USA MARKET General information IMPORTANT To reduce the risk of fire, electrical shock, or injury when using your dishwasher, please follow these basic precautions including the following. • Read all instructions before using your dishwasher. • This Manual does not cover every possible condition and situation that may occur. Use common sense and caution when installing, operating, and maintaining this appliance. -
Page 9: Cwarranty
– inadequate or interrupted water supply, steam, air, gas subject to local terms and conditions. (including impurities and/or other that does not comply Check on Electrolux Professional website the list of authorized with the technical requirements for each machine); customer care. -
Page 10: Instructions For Use And Maintenance
End of use Danger Meaning When the appliance is no longer to be used, make it unusable by removing the mains power supply wiring. danger of crushing hands Residual risks The machine has several risks that were not completely eliminated from a design standpoint or with the installation of adequate protection devices. -
Page 11: Egeneral Information
Care service Manufacturer and who, based on his Electrolux Professional spa - Viale Treviso, 15 - 33170 Pordenone (Italy) or specialised professional and specific training, experi- The dataplate gives the product identification and technical data;... -
Page 12: How To Identify The Technical Data
Nominal 9.9 kW IPX4 C = Cold rinse Electrolux Professional spa - Viale Treviso, 15 - 33170 Pordenone (Italy) D = Detergent pump installed P = Drain pump installed G = Detergent and drain pumps installed W = Water Softener installed... -
Page 13: Copyright
This manual is intended solely for consultation by the operator and can only be given to third parties with the permission of • use of the machine by uninformed and / or untrained Electrolux Professional company. personnel; • non-application of the current provisions in the country of Keeping the manual use, concerning safety, hygiene and health in the workplace. -
Page 14: Main Technical Characteristics For Three Phases Appliances
ELAI1G ELAI1WG ELAI1G8 ELAI1G4 Model ELAI1GCL ELI1G36M CLAI1G NLAI1WG VLAI1G8 VLAI1G4 Tank heating elements 0.5 - 7 0.5 - 7 0.5 - 7 0.5 - 7 0.5 - 7 2 - 3 Water supply [kPa] [50 - 700] [50 - 700] pressure [50 - 700] [50 - 700]... - Page 15 ELAI3... ELI3G6M ZLAI3... ELAI3WP ELAI3- NLAI3... ELI3 ELI3CG ELI3G5M Model ZLAI3WP GUSPH6 VLAI3... ZLI3 ZLI3CD ELI3G35M ZLAI3WG ELAI3- XLAI3... GUSPH5 DW6-38 10 - 50 ℃ Water supply [50 - 122] temperature [℉] [122] [122] [122] [122] [122] 50 - [122] Water supply 14/8/10 14/8/10...
-
Page 16: Hproduct Description
EUCA060 VUCA060 Model ELAI3GTL ELAI3GCL ELAI3GWL ZUCA060 ET5AI ET5AIP ELAI3PML ELAI3WGML 3 (for wash cycle 1) 3 (for wash Hot rinse cycle 3.5 (for cycle 1 and 2) water wash cycle 4 (for wash consumption cycle 3) 4 (for wash cycle 3) Cold rinse cycle water... -
Page 17: Icontrol Panel Description
CONTROL PANEL DESCRIPTION Control panel description On/Off On/Off Drain/self-cleaning cycle This button indicates equipment status: on or off. When the Display equipment is on, the button indicator is lit up. Tank temperature indicator Boiler temperature indicator Wash cycle 1 Wash cycle 2 Wash cycle 3 Cold rinse cycle Cold rinse cycle... -
Page 18: Joperation
Wash cycle 1 Active/Wash Safe Control indicator In the Active/Wash Safe Control This button starts Wash cycle 1. When the cycle is selected, models a special device checks the button indicator is lit up. This cycle is recommended for the temperature of the rinse phase. washing not very dirty dishes. -
Page 19: Type Of Racks And Loading
IMPORTANT • Half size basket - universal (500 x 250 mm) The appliance does not remove burnt food deposits from dishes. Dishes with burnt-on food deposits should be cleaned mechanically/chemically before putting them in the dishwasher. Before inserting the racks in the machine, clear the dishes of any food residuals and rinse them with cold or warm water, at a max. -
Page 20: Wash Cycles
Electrolux Professional. In the Electrolux A device lengthens the cycle time if the water in the boiler has Professional web site, open the “Accessories and not reached the minimum temperature for correct rinsing. -
Page 21: Continuous Water Softener
Continuous water softener The water can only be softened if there is salt in the special container. The salt container must be filled when the dish- IMPORTANT washer is started the first time and whenever the message Unlike conventional water softeners, this continu- SAL End appears on the display and an audible alarm sounds. -
Page 22: End Of Service
brush or sponge. If another type of detergent is used, carefully • Close the door. Select the drain cycle by pressing button follow the producer's instructions and observe the safety rules Drain/Self cleaning cycle. given in the information sheets provided with the product or substance. -
Page 23: Lmaintenance
MAINTENANCE Maintenance intervals Maintenance, inspections, Fre- Respon- checks and cleaning quency sability The inspection and maintenance intervals depend on the actual machine operating conditions and ambient conditions Yearly Service Electrical control panel (presence of dust, damp, etc.), therefore precise time intervals •... -
Page 24: Machine Disposal
NOTE! Machine disposal On the right side of the machine there is a hole, At the end of the product’s life cycle, make sure the equipment indicated by a “CHECK POINT” label (see figure is not dispersed in the environment. The equipment must be below), for accessing the washing chamber with a disposed of in compliance with current regulations in the temperature measurer. - Page 25 Anomaly Type of Possible causes Actions anomaly Stains on the glasses. Loss of Foamy detergent present in the Only use “non-foaming“ products for performance. wash tank. professional dishwashers. The dosing of rinse aid is not Call detergent and rinse aid service correct.
- Page 26 Anomaly Type of anomaly Possible causes Actions TANK WATER LEVEL The waste outlet pipe and/or the overflow Remove any obstruction from the waste TOO HIGH aperture obstructed. outlet pipe and/or the overflow aperture. C1 – C8 CALL THE SERVICE CENTRE E1 –...
- Page 28 Electrolux Professional SPA Viale Treviso 15 33170 Pordenone www.electroluxprofessional.com...