Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Husqvarna EE 5 2021
Summary of Contents for Husqvarna EE 5 2021
- Page 1 OWNER'S MANUAL 2021 EE 5 Art. no. 3402438en...
- Page 3 DEAR HUSQVARNA MOTORCYCLES CUSTOMER Congratulations on your decision to purchase a Husqvarna motorcycle. You are now the owner of a state-of- DEAR HUSQVARNA MOTORCYCLES CUSTOMER the-art sports vehicle that will continue to give you and your child pleasure for a long time if you maintain it properly.
-
Page 4: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS MULTIFUNCTIONAL ELEMENT ...... 19 MEANS OF REPRESENTATION......5 Multifunctional element....... 19 Symbols used ........5 Ride mode button ....... 19 Formats used ........5 Ride mode display ......20 SAFETY ADVICE ..........6 Malfunction indicator lamp ....20 Use definition –... - Page 5 TABLE OF CONTENTS 11.14 Adjusting the rebound damping of BRAKE SYSTEM ..........62 the fork..........38 14.1 Checking play of handbrake lever ..62 11.15 Handlebar position......38 14.2 Adjusting the play of the hand brake 11.16 Adjusting the handlebar position ..
- Page 6 TABLE OF CONTENTS 21.3 Electrical system......... 94 21.4 Tires ............ 94 21.5 Fork............. 94 21.6 Shock absorber ........95 21.7 Chassis tightening torques ....95 SUBSTANCES..........98 AUXILIARY SUBSTANCES......99 STANDARDS ..........100 INDEX OF SPECIAL TERMS ......101 LIST OF ABBREVIATIONS ......102 LIST OF SYMBOLS ........
-
Page 7: Means Of Representation 1
MEANS OF REPRESENTATION 1 Symbols used The meaning of specific symbols is described below. Indicates an expected reaction (e.g., of a work step or a function). Indicates an unexpected reaction (e.g., of a work step or a function). All work marked with this symbol requires specialist knowledge and technical understanding. In the interest of the safety of your child, have these jobs performed in an authorized Husq- varna Motorcycles workshop. -
Page 8: Safety Advice
2 SAFETY ADVICE Use definition – intended use This vehicle is designed and constructed to withstand the stresses and strains of regular racing if the maximum rider weight is not exceeded. Info Only operate this vehicle in closed-off areas remote from public road traffic. Only use the lithium-ion battery while it is inside the vehicle. -
Page 9: Safe Operation
SAFETY ADVICE 2 Opening the rechargeable lithium-ion battery (Powerpack LV) or the motor. Using the vehicle or the rechargeable lithium-ion battery when proper maintenance has not been performed. Using the vehicle or the rechargeable lithium-ion battery outside of its defined use. Using a damaged lithium-ion battery. -
Page 10: Fall Or Accident
When disposing of the lithium-ion battery (Powerpack LV), observe the relevant laws and guidelines of your country. Your authorized Husqvarna Motorcycles dealer can dispose of the Powerpack LV free of charge and in an envi- ronmentally compatible manner. Because motorcycles are not subject to the EU regulations governing the disposal of used vehicles, there are no legal regulations that pertain to the disposal of an end-of-life motorcycle. -
Page 11: Owner's Manual
The Owner's Manual is an important component of the vehicle and must be handed over to the new owner if the vehicle is sold. The Owner's Manual is also available for download from your authorized Husqvarna Motorcycles dealer and on the Husqvarna Motorcycles website. -
Page 12: Important Notes
3 IMPORTANT NOTES Manufacturer warranty, implied warranty The work prescribed in the service schedule must only be carried out in an authorized Husqvarna Motorcy- cles workshop and confirmed in the Husqvarna Motorcycles Dealer.net, as otherwise all warranty claims will be void. Damage or secondary damage caused by tampering with and/or conversions on the vehicle are not covered by the manufacturer warranty. -
Page 13: Power Supply
IMPORTANT NOTES 3 Power supply M01701-10 A rechargeable lithium-ion battery (Powerpack LV) is installed in the vehicle. The Powerpack LV supplies electric motor and multifunctional element with voltage. The Powerpack LV is firmly bolted to the frame and motor. Operation at low temperatures In order to protect the Powerpack LV, the motor control reduces the power at low component temperatures. -
Page 14: View Of Vehicle
4 VIEW OF VEHICLE View of vehicle, front left (example) M01715-10 Hand brake lever ( p. 16) Magnetic switch under the seat ( p. 17) Plug-in stand holder Charging socket... -
Page 15: View Of Vehicle, Rear Right (Example)
VIEW OF VEHICLE 4 View of vehicle, rear right (example) M01716-10 Quick release of seat Multifunctional element ( p. 19) Magnetic switch on handlebar ( p. 16) Throttle grip ( p. 16) Vehicle identification number ( p. 14) On/Off button ( p. -
Page 16: Serial Numbers
5 SERIAL NUMBERS Vehicle identification number The vehicle identification number is stamped on the right side of the steering head. 401945-10 Type label The type label is located on the front frame tube. 402154-10 Motor number The motor number is located on the right side of the motor below the Powerpack LV. -
Page 17: Shock Absorber Article Number
SERIAL NUMBERS 5 Shock absorber article number The shock absorber article number is stamped on the bottom of the shock absorber toward the right-hand side. H01186-10 Battery identification number The battery identification number (BIN) is located on a sticker on the Powerpack LV. M01631-10... -
Page 18: Controls
6 CONTROLS Hand brake lever Hand brake lever is fitted on the right side of the handlebar. The hand brake lever is used to activate the front brake. M01656-10 Throttle grip The throttle grip is fitted on the right side of the handlebar. After activation, the vehicle initially does not react to the throttle grip to prevent accidental acceleration. -
Page 19: Magnetic Switch Under The Seat
CONTROLS 6 Warning Risk of injury If the magnetic switch remains in the holder during a fall, the vehicle is not immediately deacti- vated. – Make sure that the loop of the magnetic switch is securely attached to the user’s protective clothing or wrist so that the magnetic switch is disconnected from the holder in the event of a fall. -
Page 20: Plug-In Stand
6 CONTROLS Plug-in stand The fixture for plug-in stand is located on the frame on the left side of the vehicle. The plug-in stand is used to park the motorcycle. Info Remove the plug-in stand before riding. 402581-10 Diagnostics connector Diagnostics connector is located under the seat. -
Page 21: Multifunctional Element 7
MULTIFUNCTIONAL ELEMENT 7 Multifunctional element The multifunctional element is mounted in front of the seat. Overview of multifunctional element Ride mode button ( p. 19) Ride mode display ( p. 20) Malfunction indicator lamp ( p. 20) Charging level indicator ( p. -
Page 22: Ride Mode Display
7 MULTIFUNCTIONAL ELEMENT Ride mode display Red ride mode displays with the numbers 1, 2, or 3 show the ride mode selected. Six ride modes are available. The ride modes define how the vehicle will respond to operation of the throttle grip. The lowest torque is available in ride mode 1. -
Page 23: Power Reduction
MULTIFUNCTIONAL ELEMENT 7 The last segment lights up in yellow: charging level 20% - 30%. The last segment lights up in red and the driving mode indi- cator flashes red: charging level 10%–20%. The last segment and the driving mode indicator light up in red: charging level 0%–10%. -
Page 24: Preparing For Use
8 PREPARING FOR USE Advice on preparing for first use Warning Danger of accidents A lack of physical and mental readiness on the part of the child poses a major risk. Children often underestimate or fail to recognize dangerous situations. – Your child must already be able to ride a bicycle. - Page 25 Never leave the vehicle unattended. – Protect the vehicle against access by unauthorized persons. – Ensure that the pre-sale inspection work has been carried out by an authorized Husqvarna Motorcycles workshop. You will receive a delivery certificate when the vehicle is handed over. –...
-
Page 26: Riding Instructions
9 RIDING INSTRUCTIONS Checks and maintenance measures when preparing for use Info Before every trip, check the condition of the vehicle and ensure that it is safe to operate. The vehicle must be in perfect technical condition when it is being operated. –... -
Page 27: Starting Off
Danger of accidents A spongy pressure point on the front or rear brake reduces braking efficiency. – Check the brake system and do not allow your child to continue riding until the problem is elimi- nated. (Your authorized Husqvarna Motorcycles workshop will be glad to help.) -
Page 28: Recuperation
9 RIDING INSTRUCTIONS Warning Danger of accidents Moisture and dirt impair the brake system. – Explain to your child that he or she must brake carefully several times to dry out and remove dirt from the brake linings and the brake discs. –... -
Page 29: Transporting
RIDING INSTRUCTIONS 9 Transporting Note Danger of damage The parked vehicle can roll away or fall over. – Park the vehicle on a firm and level surface. Note Fire hazard Hot vehicle components pose a fire hazard and explosion risk. – Do not park the vehicle near to materials which are highly flammable or explosive. –... -
Page 30: 10 Service Schedule
Different service intervals may apply in your country, depending on the local operating conditions. Individual service intervals and scopes may change in the course of technical developments. The most up- to-date service schedule can always be found on Husqvarna Motorcycles Dealer.net. Your authorized Husq- varna Motorcycles dealer will be glad to advise you. -
Page 31: Recommended Work
● Final check: Check the vehicle for safe operation and take a test ride. ○ ● ● ● Read out the fault memory after the test ride using the Husqvarna Motorcycles diagnostics tool. ○ ● ● ● Make a service entry in Husqvarna Motorcycles‑Dealer.net. -
Page 32: 11 Suspension Setting
11 SUSPENSION SETTING 11.1 Checking the basic chassis setting with the rider's weight Info When adjusting the basic chassis setting, first adjust the shock absorber and then the fork. – For optimal motorcycle riding characteristics and to avoid damage to forks, shock absorbers, link fork and frame, the basic settings of the suspension components must match the rider's weight. -
Page 33: Compression Damping Of The Shock Absorber
The shock absorber is filled with highly compressed nitrogen. – Please follow the description provided. (Your authorized Husqvarna Motorcycles workshop will be glad to help.) Info The effect of the low-speed compression adjuster can be seen in slow to normal compression of the shock absorber. -
Page 34: Adjusting The High-Speed Compression Damping Of The Shock Absorber
The shock absorber is filled with highly compressed nitrogen. – Please follow the description provided. (Your authorized Husqvarna Motorcycles workshop will be glad to help.) Info The effect of the high-speed compression adjuster can be seen in fast compression of the shock absorber. -
Page 35: Measuring The Dimension Of The Rear Wheel Unloaded
SUSPENSION SETTING 11 – Turn adjusting screw clockwise up to the last perceptible click. – Turn counterclockwise by the number of clicks correspond- ing to the shock absorber type. Guideline Rebound damping Comfort 17 clicks Standard 15 clicks F02185-10 Sport 13 clicks Info Turn clockwise to increase the damping;... -
Page 36: Checking The Static Sag Of The Shock Absorber
11 SUSPENSION SETTING 11.8 Checking the static sag of the shock absorber – Measure dimension of rear wheel unloaded. ( p. 33) – Hold the motorcycle upright with aid of an assistant. – Measure the distance between rear axle and fixed point again. -
Page 37: Adjusting The Spring Preload Of The Shock Absorber
Risk of injury Parts of the shock absorber will move around if the shock absorber is detached incor- rectly. The shock absorber is filled with highly compressed nitrogen. – Please follow the description provided. (Your authorized Husqvarna Motorcycles workshop will be glad to help.) Preparatory work –... -
Page 38: Adjusting The Riding Sag
11 SUSPENSION SETTING 11.11 Adjusting the riding sag Preparatory work – Raise the motorcycle with a lift stand. ( p. 45) – Remove the shock absorber. p. 54) – After removing the shock absorber, clean it thoroughly. Main work – Choose and mount a suitable spring. -
Page 39: Adjusting The Fork Air Pressure
Info This is due to the volume of the hose and not due to a defect in the fork airpump or the fork. Read the accompanying instructions for Husqvarna Motorcycles accessories. – Adjust the air pressure as specified. Guideline Air pressure... -
Page 40: Adjusting The Rebound Damping Of The Fork
11 SUSPENSION SETTING When disconnecting, excess pressure will escape from the hose – the fork leg itself does not lose any air. The fork airpump indicator switches off automatically after 80 seconds. – Mount the protection cap. Info Only mount the protection cap by hand. Finishing work –... -
Page 41: Adjusting The Handlebar Position
SUSPENSION SETTING 11 11.16 Adjusting the handlebar position Warning Danger of accidents A repaired handlebar poses a safety risk. If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a result. – Change the handlebar if the handlebar is damaged or bent. –... -
Page 42: 12 Seat Height
12 SEAT HEIGHT 12.1 Seat height adjustment options This vehicle offers several options for adjusting the seat height to the rider's height. The seat height can be changed with the mounting position of the fork, shock absorber, and frame. Info When adjusting the seat height on the fork and shock absorber, make sure that the vehicle is as straight as pos- sible after completion of the work. -
Page 43: Adjusting The Seat Height On The Fork
SEAT HEIGHT 12 12.3 Adjusting the seat height on the fork Warning Danger of accidents Modifications to the suspension setting may seriously alter the handling charac- teristic. – Make sure your child rides slowly to start with after making adjustments in order that he or she can assess the new handling characteristic. -
Page 44: Adjusting The Seat Height On The Frame
12 SEAT HEIGHT 12.4 Adjusting the seat height on the frame Preparatory work – Remove the seat. ( p. 55) Main work – Remove screw M01708-10 – Pull off the front fairing sideways on both sides and remove it upward. M01709-10 –... - Page 45 SEAT HEIGHT 12 – Remove screws and position subframe at the drill holes at the desired seat height. Guideline Pay attention to the wiring harness. High seat position Drill holes Low seat position Drill holes – Mount and tighten screws Guideline Screw, sub- 30 Nm (22.1 lbf ft)
- Page 46 12 SEAT HEIGHT – Position the front fairing on holders M01717-10 – Engage the front fairing on both sides. M01709-11 – Mount and tighten screw Guideline Remaining screws, 10 Nm (7.4 lbf ft) chassis M01708-10 Finishing work – Mount the seat. ( p.
-
Page 47: Service Work On The Chassis 13
SERVICE WORK ON THE CHASSIS 13 13.1 Raising the motorcycle with a lift stand Note Danger of damage The parked vehicle can roll away or fall over. – Park the vehicle on a firm and level surface. – Raise the motorcycle at the frame underneath the engine. Lift stand (78929955100) Neither wheel is in contact with the ground. -
Page 48: Cleaning The Dust Boots Of The Fork Legs
13 SERVICE WORK ON THE CHASSIS 13.4 Cleaning the dust boots of the fork legs Preparatory work – Raise the motorcycle with a lift stand. ( p. 45) – Remove the fork protector. ( p. 46) Main work – Push dust boots of both fork legs downward. -
Page 49: Installing The Fork Protector
SERVICE WORK ON THE CHASSIS 13 13.6 Installing the fork protector – Position the fork protector on the left and right fork leg. Mount and tighten screws Guideline Remaining screws, 10 Nm (7.4 lbf ft) chassis – Position the brake line and the clamp. Mount and tighten screws Guideline M01710-11... -
Page 50: Removing The Lower Triple Clamp
13 SERVICE WORK ON THE CHASSIS Bleeder screws are positioned toward the rear. The second milled groove (from the top) is flush with the upper edge of the upper triple clamp. – Tighten screws Guideline Screw, top triple 20 Nm (14.8 lbf ft) clamp –... -
Page 51: Installing The Lower Triple Clamp
SERVICE WORK ON THE CHASSIS 13 Info Cover the components to protect them against dam- age. Do not kink the cables and lines. – Remove protective ring – Remove the lower triple clamp with the steering stem. – Remove the upper steering head bearing. M01668-10 13.10 Installing the lower triple clamp... - Page 52 13 SERVICE WORK ON THE CHASSIS – Position the upper triple clamp with the handlebar. – Mount nut , but do not tighten it yet. M01714-11 Condition Individual installation position – Position the fork legs. Guideline Observe the position determined during removal. Bleeder screws are positioned toward the rear.
-
Page 53: Checking The Steering Head Bearing Play
Danger of accidents Incorrect steering head bearing play impairs the handling characteristic and damages components. – Correct incorrect steering head bearing play immediately. (Your authorized Husqvarna Motorcy- cles workshop will be glad to help.) Info If the vehicle is operated for a lengthy period with play in the steering head bearing, the bearings and the bearing seats in the frame can become damaged over time. -
Page 54: Adjusting The Steering Head Bearing Play
13 SERVICE WORK ON THE CHASSIS It must be possible to move the handlebar easily over the entire steering range. There should be no detectable detent positions. » If detent positions are detected: – Adjust the steering head bearing play. p. -
Page 55: Removing The Start Number Plate
SERVICE WORK ON THE CHASSIS 13 13.14 Removing the start number plate – Remove screw – Unhook the start number plate from the brake line and remove it. M01719-10 13.15 Installing the start number plate – Attach the start number plate to the brake line. –... -
Page 56: Installing Front Fender
13 SERVICE WORK ON THE CHASSIS 13.17 Installing front fender – Position the fender with drill holes in the holding lugs on the start number plate. M01723-10 – Position front fender. Mount and tighten screws Guideline Screw, fender 6 Nm (4.4 lbf ft) M01810-11 13.18 Removing the shock absorber... -
Page 57: Removing The Seat
SERVICE WORK ON THE CHASSIS 13 Main work – Push splash protector to the side. – Mount the shock absorber with screw Guideline If necessary, observe the installation position noted during removal. Screw, top 45 Nm (33.2 lbf ft) ® Loctite 243™... -
Page 58: Checking The Chain For Dirt
13 SERVICE WORK ON THE CHASSIS 13.22 Checking the chain for dirt – Check the chain for coarse dirt accumulation. » If the chain is very dirty: – Clean the chain. ( p. 56) 400678-01 13.23 Cleaning the chain Warning Danger of accidents Lubricants on the tires reduces the road grip. -
Page 59: Checking The Chain Tension
SERVICE WORK ON THE CHASSIS 13 13.24 Checking the chain tension Warning Danger of accidents Incorrect chain tension damages components and results in accidents. If the chain is tensioned too much, the chain, engine sprocket, rear sprocket, transmission and rear wheel bearings wear more quickly. Some components may break if overloaded. If the chain is too loose, the chain may fall off the engine sprocket or the rear sprocket. -
Page 60: Checking The Chain, Rear Sprocket, Motor Sprocket, And Chain Guide
13 SERVICE WORK ON THE CHASSIS Main work – Loosen nut – Loosen nuts – Adjust the chain tension by turning adjusting screws left and right. Guideline Chain tension 5 … 8 mm (0.2 … 0.31 in) Turn the adjusting screws on the left and right so that Q00401-10 the markings on the left and right chain adjusters... - Page 61 SERVICE WORK ON THE CHASSIS 13 – Check the chain sliding guard for wear. » If the ridge is worn down to the level of the main corpus: – Change the chain sliding guard. – Check that the chain sliding guard is firmly seated. »...
-
Page 62: Adjusting The Chain Guide
If the frame exhibits cracks or deformation due to a mechanical impact: – Change the frame. Info Always replace a frame that has been damaged due to a mechanical impact. Repair of the frame is not authorized by Husqvarna M01652-01 Motorcycles. -
Page 63: Checking The Link Fork
SERVICE WORK ON THE CHASSIS 13 13.29 Checking the link fork – Check the link fork for damage, cracking, and deformation. » If the link fork shows signs of damage, cracking, or defor- mation: – Change the link fork. Info Always replace a damaged link fork. -
Page 64: 14 Brake System
14 BRAKE SYSTEM 14.1 Checking play of handbrake lever Warning Danger of accidents The brake system fails in the event of overheating. If there is no free travel on the hand brake lever, pressure builds up on the front brake circuit. –... -
Page 65: Checking The Brake Discs
Warning Danger of accidents Worn-out brake discs reduce the braking effect. – Make sure that worn-out brake discs are replaced immediately. (Your authorized Husqvarna Motor- cycles workshop will be glad to help.) – Check the front and rear brake disc thickness at multiple... -
Page 66: Checking The Front Brake Fluid Level
Danger of accidents Old brake fluid reduces the braking effect. – Make sure that brake fluid for the front and rear brake is changed in accordance with the service schedule. (Your authorized Husqvarna Motorcycles workshop will be glad to help.) Note Environmental hazard Hazardous substances cause environmental damage. -
Page 67: Adding Front Brake Fluid
Danger of accidents Old brake fluid reduces the braking effect. – Make sure that brake fluid for the front and rear brake is changed in accordance with the service schedule. (Your authorized Husqvarna Motorcycles workshop will be glad to help.) Note Environmental hazard Hazardous substances cause environmental damage. -
Page 68: Checking The Front Brake Linings
Checking the front brake linings Warning Danger of accidents Worn-out brake linings reduce the braking effect. – Ensure that worn-out brake linings are replaced immediately. (Your authorized Husqvarna Motorcy- cles workshop will be glad to help.) – Check the brake linings for minimum thickness ≥... - Page 69 Danger of accidents Brake linings which have not been approved alter the braking efficiency. Not all brake linings are tested and approved for Husqvarna motorcycles. The structure and friction coefficient of the brake linings, and thus their brake power, may vary greatly from that of original brake linings.
- Page 70 14 BRAKE SYSTEM – Remove screw – Press back the brake linings by slightly tilting the brake caliper laterally on the brake disc. Carefully pull the brake caliper backward from the brake disc. – Press the brake piston back into the basic position and ensure that brake fluid does not flow out of the brake fluid reservoir, extracting some if necessary.
-
Page 71: Checking The Free Travel Of The Foot Brake Lever
BRAKE SYSTEM 14 – Check the brake fluid level and correct if necessary. Guideline Brake fluid level below 5 mm (0.2 in) reservoir rim Brake fluid DOT 4 / DOT 5.1 ( p. 98) – Position cover with membrane – Mount and tighten screws Q00414-10 Info... -
Page 72: Adjusting The Basic Position Of The Foot Brake Lever
14 BRAKE SYSTEM – Detach the foot brake lever spring. – Loosen nut – Turn push rod accordingly until you have free travel Guideline Free travel of foot brake 3 … 5 mm (0.12 … 0.2 in) lever – Hold push rod and tighten nut –... -
Page 73: Checking The Rear Brake Fluid Level
– Check the brake system and ensure that nobody drives the vehicle before the problem is elimi- nated. (Your authorized Husqvarna Motorcycles workshop will be glad to help.) Warning Danger of accidents Old brake fluid reduces the braking effect. -
Page 74: Checking The Brake Linings Of The Rear Brake
45) 14.14 Checking the brake linings of the rear brake Warning Danger of accidents Worn-out brake linings reduce the braking effect. – Ensure that worn-out brake linings are replaced immediately. (Your authorized Husqvarna Motorcy- cles workshop will be glad to help.) -
Page 75: Changing The Rear Brake Linings
Danger of accidents Brake linings which have not been approved alter the braking efficiency. Not all brake linings are tested and approved for Husqvarna motorcycles. The structure and friction coefficient of the brake linings, and thus their brake power, may vary greatly from that of original brake linings. - Page 76 14 BRAKE SYSTEM Note Environmental hazard Hazardous substances cause environmental damage. – Dispose of oils, grease, cleaning agents, brake fluid etc. properly and in compliance with the appli- cable regulations. Info Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5 brake fluid.
- Page 77 BRAKE SYSTEM 14 – Position the new brake linings. Info Always change the brake linings in pairs. Ensure that the brake linings are correctly positioned in the holding spring. – Position the brake caliper on the brake disc. The brake linings are correctly positioned. F02207-11 –...
-
Page 78: 15 Wheels, Tires
15 WHEELS, TIRES 15.1 Removing the front wheel Preparatory work – Raise the motorcycle with a lift stand. ( p. 45) Main work – Remove screw – Loosen screws M01697-10 Warning Danger of accidents Damaged brake discs reduce the braking effect. –... -
Page 79: Removing The Rear Wheel
WHEELS, TIRES 15 – Check the wheel bearing for damage and wear. » If the wheel bearing is damaged or worn: – Change front wheel bearing. – Clean and grease the contact surfaces of the spacers. Long-life grease ( p. 99) –... -
Page 80: Installing The Rear Wheel
15 WHEELS, TIRES – Pull out wheel spindle far enough to allow the rear wheel to be pushed forward. – Push the rear wheel forward as far as possible. Remove the chain from the rear sprocket. Info Cover the components to protect them against dam- age. -
Page 81: Checking The Tire Condition
Checking the tire condition Info Only mount tires approved and/or recommended by Husqvarna Motorcycles. Other tires could have a negative effect on handling characteristics. The type, condition, and pressure of the tires all have a major impact on the handling characteristic of the motorcycle. -
Page 82: Checking Tire Pressure
Other spokes will become looser as a result. – Check spoke tension regularly, and in particular on a new vehicle. (Your authorized Husqvarna Motorcycles workshop will be glad to help.) - Page 83 WHEELS, TIRES 15 – Strike each spoke briefly using a screwdriver blade. Info The frequency of the sound depends on the spoke length and spoke diameter. If you hear different tone frequencies from different spokes of equal length and diameter, this is an indica- tion of different spoke tensions.
-
Page 84: 16 Powerpack Lv, Battery Charger
16 POWERPACK LV, BATTERY CHARGER 16.1 Overview of battery charger Battery charger Carrying handle Power cord Charging cable M01630-10 16.2 Positioning the battery charger Warning Risk of injury If the battery charger is used incorrectly, its intrinsic safety cannot be guaranteed. The battery charger is only suitable for use with a Powerpack HV. -
Page 85: Charging The Powerpack Lv
Environmental hazard A lithium-ion battery (Powerpack HV) contains components and elements that are harmful to the environment. – Never throw a Powerpack HV into the household trash. – Dispose of the Powerpack HV properly and in compliance with the applicable regulations. (Your authorized Husqvarna Motorcycles workshop will be glad to help.) - Page 86 16 POWERPACK LV, BATTERY CHARGER Info Do not activate the vehicle while the battery charger is connected to the Powerpack LV. If the vehicle is activated during the charging process, the vehicle switches to the fault state. Info If the temperature of the Powerpack LV exceeds the permissible value while it is being charged, the bat- tery charger stops charging.
- Page 87 POWERPACK LV, BATTERY CHARGER 16 – Connect the power plug for the battery charger to the mains connection. Charging starts automatically. The multifunctional element indicates the charging level. – Monitor the charging level of the Powerpack LV on the multifunctional element ( p.
- Page 88 16 POWERPACK LV, BATTERY CHARGER – Check charging socket protection cap » If the charging socket protection cap is dirty: – Clean the charging socket protection cap without water or compressed air. » If the charging socket protection cap is damaged or worn: –...
-
Page 89: Cooling 17
COOLING 17 17.1 Cooling The Powerpack LV and the electric motor are air-cooled. Cooling is effected by the air stream. The lower the speed, the less the cooling effect. Dirty cooling fins also reduce the cooling effect. M01734-10... -
Page 90: 18 Cleaning, Care
18 CLEANING, CARE 18.1 Cleaning the motorcycle Note Material damage Components become damaged or destroyed if a pressure cleaner is used incorrectly. The high pressure forces water into the electrical components, connectors, throttle cables, and bearings, etc. Pressure which is too high causes malfunctions and destroys components. –... - Page 91 CLEANING, CARE 18 – Treat bare metal (except for brake discs) with a corrosion inhibitor. Preserving materials for paints, metal and rubber ( p. 99) – Treat all plastic parts and powder-coated parts with a mild cleaning and care product. Special cleaner for glossy and matte paint finishes, metal and plastic surfaces ( p.
-
Page 92: 19 Storage
Store the vehicle in a dry location that is not subject to large fluctuations in temperature. Guideline Ideal storage temperature 10 … 20 °C (50 … 68 °F) Info Husqvarna Motorcycles recommends jacking up the motorcycle. – Raise the motorcycle with a lift stand. ( p. 45) –... -
Page 93: Troubleshooting 20
If a fault is not eliminated by the measures specified here, or a blink code is not listed, an authorized 402136-10 Husqvarna Motorcycles workshop will be happy to help you. Info The pause between the signals of the 1st digit is 0.25 sec- onds. - Page 94 20 TROUBLESHOOTING Faults Possible cause Action – Blink code 85 Fault during charging Disconnect the battery charger from the vehicle and mains connection, wait 1 minute, restart the charging process. – Replace the charging cable. – Blink code 88 Fault in the On/Off button Deactivate the vehicle, wait 4 minutes, reactivate the vehicle.
-
Page 95: Technical Data 21
TECHNICAL DATA 21 21.1 Engine Design Brushless DC motor Nominal power 2 kW (3 hp) Maximum electric power 5 kW (7 hp) Recuperation available in ride mode 3 and 6 Maximum torque depending on ride mode approx. Ride mode 1 6 Nm (4.4 lbf ft) Ride mode 2 9 Nm (6.6 lbf ft) -
Page 96: Electrical System
2.75 - 10 38J TT MAXXIS MAXX CROSS SI MAXXIS MAXX CROSS SI The tires specified represent one of the possible series production tires. Additional information is available in the Service section under: www.husqvarna-motorcycles.com 21.5 Fork Fork article number 07.18.6U.02... -
Page 97: Shock Absorber
TECHNICAL DATA 21 21.6 Shock absorber Shock absorber article number 03.18.7U.02 Shock absorber WP XACT 5735 Low-speed compression damping Comfort 18 clicks Standard 15 clicks Sport 12 clicks High-speed compression damping Comfort 2.5 turns Standard 2 turns Sport 1.5 turns Rebound damping Comfort 17 clicks... - Page 98 21 TECHNICAL DATA Nut, push rod, foot brake lever 6 Nm (4.4 lbf ft) Rear fairing screw 8 Nm (5.9 lbf ft) Remaining nuts, chassis 10 Nm (7.4 lbf ft) Remaining screws, chassis 10 Nm (7.4 lbf ft) Screw, chain sliding guard 3 Nm (2.2 lbf ft) Screw, fender 6 Nm (4.4 lbf ft)
- Page 99 TECHNICAL DATA 21 Screw, handlebar support 40 Nm (29.5 lbf ft) ® Loctite 243™ Screw, top shock absorber 45 Nm (33.2 lbf ft) ® Loctite 243™ Nut, rear wheel spindle M12x1 40 Nm (29.5 lbf ft) Nut, swingarm pivot M12x1 45 Nm (33.2 lbf ft) Nut, steering head M20x1.5...
-
Page 100: 22 Substances
22 SUBSTANCES Brake fluid DOT 4 / DOT 5.1 Standard/classification – Guideline – Use only brake fluid that complies with the specified standard (see specifications on the container) and that exhibits the corresponding properties. Recommended supplier Castrol – REACT PERFORMANCE DOT 4 ®... -
Page 101: Auxiliary Substances 23
AUXILIARY SUBSTANCES 23 Chain cleaner Recommended supplier ® MOTOREX – Chain Clean High viscosity grease Recommended supplier ® – LGHB 2 Long-life grease Recommended supplier ® MOTOREX – Bike Grease 2000 Motorcycle cleaner Recommended supplier ® MOTOREX – Moto Clean Off-road chain spray Recommended supplier ®... -
Page 102: 24 Standards
24 STANDARDS The SAE viscosity classes were defined by the Society of Automotive Engineers and are used for classifying oils according to their viscosity. The viscosity describes only one property of oil and says nothing about quality. -
Page 103: Index Of Special Terms 25
INDEX OF SPECIAL TERMS 25 Battery identification number Serial number of the Powerpack HV; this is linked to the vehicle's identification number... -
Page 104: 26 List Of Abbreviations
26 LIST OF ABBREVIATIONS Art. no. Article number circa compare e.g. for example etc. et cetera i.a. inter alia number poss. possibly... -
Page 105: List Of Symbols 27
LIST OF SYMBOLS 27 27.1 Yellow and orange symbols Yellow and orange symbols indicate an error condition that requires prompt intervention. Active driving aids are also represented by yellow or orange symbols. The malfunction indicator lamp flashes – A fault is present in the vehicle electronic system. -
Page 106: Index
INDEX INDEX Fall ....... . . 8 Accessories ......10 Figures . - Page 107 INDEX Rechargeable lithium-ion battery battery identification number (BIN) ..15 Magnetic switch charging ......83 on handlebar .
- Page 108 INDEX electrical system ....94 engine ......93 fork .
- Page 109 *3402438en* 3402438en 05/2020 Husqvarna Motorcycles GmbH Stallhofnerstraße 3 5230 Mattighofen Austria Photo: Mitterbauer/KISKA, www.husqvarna-motorcycles.com Husqvarna Motorcycles GmbH...