Active Key Lock; Menu Overview - Bosch Rexroth WGM Operating Instructions Manual

16/46 Operation
Bosch Rexroth AG, RE 51550-B/09.2019

5.1.4 Active key lock

If the key lock is activated, the display
when the menu is called up with the
▶ Enter the code with the
moves one position to the right. After entry of the third digit, the main menu is
opened.
If the numerical code is entered incorrectly, the device returns to the measured value
display. If you have forgotten your password, you can access the menu at any time
with master code 287.
You can cancel the key lock by resetting the code in the menu item
submenu Basic settings Advanced functions

5.1.5 Menu overview

The structure of the menu is based on the VDMA standard sheet 24574-1.
The menu has a hierarchical structure. The top menu level contains the main menu
items, e.g. , ,
hUMi TeMp B.ef
items.
The menu items can vary depending on the configuration of the device. Not all menu
items described in the following may apply to your device.
You can call up the configuration by pressing the
code is displayed, e.g.
Here the 4 digits mean tsav:
t: Type
s: Number of switching outputs
a: Number of analog outputs
v: Assembly type of the device
appears instead of the main menu
key. The active digit is identified by a point.
q
and keys and confirm with the
p q
by entering 000.
B.ef
, , . Each main menu contains further submenu
DIa e
p
key. The active digit
u
in the
lOC
key in the display mode. A 4-digit
h= humidity and temperature
measurement
2 or 4
0 or 2
i = standard assembly
(tank installation)
r = remote installation