Philips 22PFA5403S/67 Service Manual

Philips 22PFA5403S/67 Service Manual

Hide thumbs Also See for 22PFA5403S/67:

Advertisement

Chassis name
TPH18.2A LA
Published by Amy.ma 1805 Quality
2018
TP Vision Netherlands B.V.
©
All rights reserved. Specifications are subject to change without notice. Trademarks are the
property of Koninklijke Philips Electronics N.V. or their respective owners.
TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust
earlier supplies accordingly.
PHILIPS and the PHILIPS' Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
Platform
V201
Subject to modification
TPH18.2A
Model name
22PFA5403S/67
22PFA5403S/70
3122 785 20590
2018-Feb-04

Advertisement

Table of Contents
loading

Summary of Contents for Philips 22PFA5403S/67

  • Page 1 Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
  • Page 2: Table Of Contents

    Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
  • Page 3: Product Information

    • POWER Product information may be subject to change without prior • USB notice. For detailed product information, please go to • HDMI www.philips.com/support • AV IN: CVBS, Audio L, Audio R TV Rear • Antenna (75 ohm) Display & Sound •...
  • Page 4: Precautions, Notes, And Abbreviation List

    Refer to the diversity tables for the correct values. two pins of the Mains/AC Power plug. • The correct component values are listed on the Philips • Check the cabinet for defects, to prevent touching of any Spare Parts Web Portal.
  • Page 5 • Mix of lead-free soldering tin/parts with leaded soldering tin/parts is possible but PHILIPS recommends strongly to avoid mixed regimes. If this cannot be avoided, carefully clear the solder-joint from old tin and re-solder with new tin.
  • Page 6 originating from the USA and used e.g. in • Always respect voltages. While some may not be dangerous in themselves, they can cause unexpected LATAM and AP-NTSC countries reactions that are best avoided. Before reaching into a B-TXT Blue TeleteXT powered TV set, it is best to test the high voltage Centre channel (audio) insulation.
  • Page 7 G-TXT Green TeleteXT distance is 6.5 MHz. L' is Band I, L is all H_sync to the module bands except for Band I High Definition LG.Philips LCD (supplier) Hard Disk Drive Loudspeaker HDCP High-bandwidth Digital Content Protection: LVDS Low Voltage Differential Signalling A “key”...
  • Page 8 Serial Peripheral Interface bus; a 4-wire module, implementing the CA system for a synchronous serial data link standard host (e.g. a TV-set) S/PDIF Sony Philips Digital InterFace Power On Reset, signal to reset the uP SRAM Static RAM PSDL Power Supply for Direct view LED...
  • Page 9 Thin Film Transistor toward external amplifier Total Harmonic Distortion Vestigial Side Band; modulation method TMDS Transmission Minimized Differential WYSIWYR What You See Is What You Record: record Signalling selection that follows main picture and Transport Stream sound TeleteXT WXGA 1280 × 768 (15:9) TXT-DW Dual Window with TeleteXT XTAL...
  • Page 10: Mechanical Instructions

    3. Mechanical Instructions 3.1 Cable Dressing ECN403 CN8605 CN403 Main board + Power board (1052) CN401 CN601 ECN401 IR Module (1056) Cable dressing (22" 5403 series) ECN601 ECN601 SPEAKER SPEAKER (1184) (1184) Back cover overview (22" 5403 series...
  • Page 11: Assembly/Panel Removal

    3.2 Assembly/Panel Removal 3.2.1 Stand removal 1. Remove the fixation screws [1] that secure the stand. 2. Take the stand bracket out from the set. 3.2.2 IR board Control Unit 1. Unplug the connector [2] from the IR board. 2. Press the snap that marked by blue box below backward then take out the IR board. When defective, replace the whole unit.
  • Page 12 3.2.3 Rear Cover Warning: Disconnect the mains power cord before removing the rear cover. 1. Releasing the clips carefully at the indicated areas [2] that secure the back cover. 2. Unplug connector [3] carefully, as the speaker is catch on back cover. 3.
  • Page 13 3.2.4 Main + Power board Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the SSB. 1. Unplug all connectors [2]. 2. Remove all the fixation screws [3]. 3.
  • Page 14: Service Modes

    4. Service Modes 4.1 Service Modes The Service Mode feature is split into following parts: Factory Mode.  Customer Service Mode (CSM).  Factory mode offer features, which can be used by the Service engineer to repair/align a TV set. Some features are: Make alignments (e.g.
  • Page 15 4.3 Customer Service Mode (CSM) Purpose The call centre can instruct the customer (by telephone) to enter CSM in order to identify the status of the set. This helps the call centre to diagnose problems and failures in the TV set before making a service call. The CSM is a read-only mode;...
  • Page 16: Software Upgrading

    5. Software Upgrading Software Upgrading Step 1: Ready for F/W Upgrade Prepare a USB memory (File format: FLAT, Size: 1G~8G). Copy the software (.bin file) to USB flash disk (root directory). Rename the file name to “image.bin”. Insert the USB memory stick that contains the software update files in TV’s USB 2.0 port. Step 2: F/W Upgrade Power off then power on the TV.
  • Page 17: Trouble Shooting

    Trouble shooting 2016年12月10日 2016/4/8 Picture-related Intermittent Ask Photo Picture ? problem ? Menu Smarkt Signal SW latest ? Backlight? issue function? issue SSB+LVDS+Panel Update SW LED working ? PSU/SSB Problem solved ? Sound ? PSU+ Panel Finish SW+SSB...
  • Page 18 Trouble shooting 2016年12月10日 2016/4/8 Audio/Sound- related Intermittent Sound ? problem ? Setting SW latest ? Mute ? issue issue Update SW Extra device Check extra connect? device Problem solved ? Factory setting Finish Sound back ? Setting issue SSB+SPK...
  • Page 19 6.Slow response to user interaction 7.Switches ON by itself 8.Switches Off by itself 9.Stuck in standby mode / unable to start up 10.Stuck on PHILIPS / ANDROID logo 11.CAM not recognized by TV 12.CAM authentication issue 13.Misc CAM issue 14.IP-EPG issues 15.BC-EPG issues...
  • Page 20: Electrical Diagram

    7. Electrical Diagram 7.1 Block diagram (For 715G9547) TCON IO USB2.0 USB2.0 HDMI0(MHL) SPI FLASH GPIO USB2.0 HDMI0 LVDS mLVDS HDMI1 HI3731V201_156PIN SPDIF HDMI2(ARC) LINEOUT AUDIO CVBS CVBS LINEIN VGA YPbPr SI2151 7.2 Power Supply Power architecture of this platform. AUDIO LVDS Display power...
  • Page 21 7.3 Power tree (For 715G9547C) Power tree VCOM RT9146 AVDD VMID MINI_VGHM RT6946 MINI_VGL PMU_3V3 VCC_PANEL FHD:PMOS 3A IRLML5203TR 2A max TCON PWR_EN 12V0 1.5A max 5V_STB DC/DC 5.5A FHD:PMOS 3A LDO 800mA DDR_VCC 12V0 3.5A max RT6206B IRLML5203TR AZ1117-ADJ 300mA max STB_PWR VBUS_HDMI0_5V...
  • Page 22 7.4 Power layout SSB C430 +12V_Panel VCC L701 +5V_STB C705 +3.3V R717 +5V0 C711 +3.3V_TUNER C720 VDD_+1V1 C602 +12V AUDIO Power SSB Top View (For 715G9547C) Power SSB Bottom View (For 715G9547C)
  • Page 23 8. IC Data Sheets 8.1 MX25L3236FM2I-08G (IC U402--FLASH)
  • Page 24 8.2 AD52060-QG28NRR (IC U601--AUDIO)
  • Page 26 8.3 R842 (IC U101--Tuner)
  • Page 28 9.Circuit Diagrams 9.1 A 715G9547 M+P BOARD 9-1-1 HISI V201 DDR_VCC SMD XTAL TP404 VDD_1V1 R402 TUNER_CLK NC/100OHM HS401 R403 XOUT 100OHM C402 27PF 50V R404 24.000Mhz 1M 1/16W HEAT SINK X401 C403 27PF 50V Close to SOC VGA IN R433 C433 VGA_R_IN...
  • Page 29 9-1-2 SOC POWER1 Power for SOC R408 R409 R410 R411 AVDD33_LVDS AVDD33_DDR_PLL1 AVDD33_DDR_PLL2 AVDD33_PLL 0R05 OHM 0R05 OHM 0R05 OHM 0R05 OHM C408 C409 C410 C411 C412 C413 C414 C415 C416 C401 C417 100NF 16V 100NF 16V 100NF 16V 100NF 16V 100NF 16V 100NF 16V 100NF 16V...
  • Page 30 9-1-3 Main POWER2 Power supply mangement 5V_STB P12V R702 4.7K1/16W BL_DIM R703 C702 5V_STB 22PF 50V R701 0R05 1/16W +12VO BRI_PWM0 UZ1084G33TN3R U702 R705 VOUT R704 100K 1% 5V_STB NC/4.7K1/16W C703 NC/1UF 10V U703 R706 C701 Vout = 0.6x(1+100/13.3)=5.11V C704 13.3K 1% C705 C706...
  • Page 31 9-1-4 IR&KEY UART & IR & KEY & XTAL KEY PADS R413 NC/10K+-5%1/16W R414 IRIN IRRX1 100OHM C428 1N 50V CN401 LED-G LED-R IRRX1 POWER_KEY DGND CONN R415 6.8K +-1% 1/16W R416 SW401 LS_ADC0 POWER_KEY 100OHM R417 UART 750 OHM 1% C429 100NF 16V DGND...
  • Page 32 9-1-5 SPI&LVDS USB & SPI FLASH & LVDS LVDS VCC_PANEL CN403 LVDS_SEL LVDS0_TAP/MLV0P LVDS0_TAN/MLV0N R423 LVDS0_TBP/MLV1P LVDS0_TBN/MLV1N LVDS0_TCP/MLV2P LVDS0_TCN/MLV2N NC/4.7K LVDS0_TCLKP/MLV3P LVDS0_TCLKN/MLV3N LVDS_SEL LVDS0_TDP/MLVCLKP LVDS0_TDN/MLVCLKN LVDS1_TAP/MLV5P LVDS1_T AN/MLV5N LVDS1_TBP/MLV6P LVDS1_T BN/MLV6N R424 LVDS1_TCP LVDS1_T CN NC/4.7K LVDS1_TCLKP LVDS1_T CLKN LVDS1_TDP LVDS1_T DN CONN P12V...
  • Page 33 9-1-6 CVBS&USB&VGA USB2.0 CVBS0 IN USB_5V TH101 CN102 CVBS0IN C103 PTCR 10uF 25V LINEIN3_L R102 10K 5% 1/16W CN101 R/A 6P 1*1 LINEIN3_R R103 10K 5% 1/16W R106 4.99ohm 1/16W +/-1% USB2_DM0 R107 4.99ohm 1/16W +/-1% USB2_DP0 R104 R105 RCA JACK 10K 5% 1/16W 10K 5% 1/16W ZD102...
  • Page 34 9-1-7 AUDIO AMP 1.2A Max U601 R602 Thermal Pad 10K 1/16W 5% PVDD AMP_STB R603 PVCCL Q601 AMP_MUTE MMBT3904 C602 100N 50V C604 10UF 16V 10K 1/16W 5% C603 1NF 50V FAULTZ PVCCL R604 LINEOUT_L2 FB602 LINP BSPL C606 120R 3A 100OHM C605 220nF 16V...
  • Page 35 9-1-8 Tuner Tuner(R842) TUNER_3V3 RF CONN RF_IN 3V3_TUN VDD3V TU101 100N 16V C113 C112 10UF C118 RF_IN L102 470pF 50V 6.8nH Close to SOC VDD3V C101 1.8 pF 50V BAV99 D101 C119 C120 NC/56pF 50V 100 OHM 1/16W 100 OHM 1/16W R110 R111 IFN_TUNER...
  • Page 36 9-1-9 HDMI&RS232 HDMI 5V_STB VBUS_HDMI0_5V 5V_STB CN501 SHELL1 HDMI_R0X2P ZD507 MHL-DET R534 LBAT54CLT1G D2 Shield HDMI_R0X2N Charge SHELL3 HDMI_R0X1P 5V_STB D1 Shield HDMI_R0X1N MHL_DET NC/4K7 1/16W 5% HDMI_R0X0P U502 D0 Shield HDMI_R0X0N R525 VBUS_HDMI0_5V R524 HDMI_R0XCP R532 10K 5% 1/16W MHL-DET R559 MHL_DET...
  • Page 37 9-1-10 AC Power +12VO +12VO BL_PWM BL_PWM BL_DIM BL_PWM BL_ON BL_ON BD9901 KBP208G-C Cold R8612 C8605 NC/22K 1% NC/100PF 500V FB9903 FB9906 FB9905 T9101 D8601 BEAD 127R BEAD POWER X'FMR SR510-22 VLED+ R9129 +18V_AL 30 OHM 1/4W L8601 47UH R9107 R9108 C8602 82K OHM 1%...
  • Page 38 9.2 715G8576 IR/LED Panel 9-2-1 IR LED LED_R 15K 1/16W 5% Vout TSOP75436TR 2.2uF 10V CONN 033G8032 5F 2K7 1/16W 5% LED1 GPSS008RC4 LED_R 22K 1/16W 5% BC847BW 100N 16V 22K 1/16W 5%...
  • Page 39 10. Styling Sheets 5403 series 22" 1052 1184 1050 1056...

This manual is also suitable for:

22pfa5403s/70Tph18.2a la

Table of Contents