Aux / Optical / Hdmi Operation; Usb Operation - Philips 6000 Series User Manual

• If your Bluetooth device supports
you can press
track, or press
resume play.
5
To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•
The music streaming may be interrupted by obstacles
between the device and Soundbar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
•
If you want to connect your Soundbar with another
Bluetooth device, press and hold
remote control to disconnect the currently connected
Bluetooth device.
AUX / OPTICAL / HDMI
Operation
Ensure that the unit is connected to the TV or
audio device.
1
Press the button repeatedly on the unit
or press the Source button on the remote
control to select the AUX, OPTICAL,
HDMI ARC, HDMI 1, HDMI 2 mode.
2
Operate your audio device directly for
playback features.
3
Press the VOL +/– buttons to adjust the
volume to your desired level.
14
/ to skip to a
/Pair to pause/
/Pair on the
Tip
•
While in OPTICAL/HDMI ARC mode, if there's no
sound output from the unit and the status Indicator
Signal output on your source device (e.g. TV, DVD or
Blu-ray player).
•
The unit may not be able to decode all digital audio
formats from the input source. In this case, the unit
will mute. This is NOT a defect. Ensure that the audio
setting of the input source (e.g. TV, game console, DVD
player, etc.) is set to PCM or Dolby Digital (Refer to
the user manual of the input source device for its audio
setting details) with HDMI 1 / HDMI 2 / HDMI ARC /
optical input.
•
In HDMI mode, when the DOLBY ATMOS audio
format is entered, the Soundbar display shows DOLBY
ATMOS.
•
When the DOLBY DIGITAL audio format is entered,
the Soundbar display shows DOLBY AUDIO.
•
When the PCM audio format is entered, the Soundbar
display shows PCM AUDIO.
•
When entering non-PCM or DOLBY DIGITAL audio
formats, if there's no sound output from the unit and
the display show NO SUPPORT.

USB Operation

Enjoy audio on a USB storage device, such as an
1
Insert the USB device.
2
Press the button repeatedly on the unit
or press the Source button on the remote
control to select the USB mode.
3
During playback:
Start, pause or resume play.
/ Skip to the previous or next track.
Tips
•
The unit can support USB devices with up to 32 GB
of memory.
•
This unit can play MP3.
•
Support a USB port: 5V
PCM or Dolby Digital
, 500mA.