Table of Contents
Advertisement
Adjust the Volume
1
Press Vol+/Vol- (Volume) to increase or
decrease a volume level.
• To mute sound, press (Mute).
• To restore the sound, press (Mute)
again or press Vol+/Vol- (Volume).
Note: While adjusting the volume, the status LED
indicator will flash quickly. When the volume has
hit maximum/minimum value level, the status
LED indicator will flashes once.
Bluetooth Operation
Through Bluetooth, connect the Soundbar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio files stored on the
device through your Soundbar speakers.
What you need
•
A Bluetooth device which supports
Bluetooth profile A2DP AVRCP and with
Bluetooth version as 4.2 + EDR.
•
The maximum operational range between
the Soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press the
button repeatedly on the unit
or press BT button on the remote control
to switch the Soundbar to Bluetooth mode.
The Soundbar's indicator blinks blue.
2
On the Bluetooth device, switch on
Bluetooth, search for and select PHILIPS
HTL3310 to start connection (see the user
manual of the Bluetooth device on how to
enable Bluetooth).
During connection, the Soundbar's
indicator blinks blue.
3
Wait until you hear "Paired" voice prompt
from the Soundbar.
If the successfully connected, the Blue
indicator will light up solidly
12
4
Select and play audio files or music on your
Bluetooth device.
• During play, if a call is coming, music play
is paused. Play resumes when the call
ends.
• If your Bluetooth device supports
AVRCP profile, on the remote control
you can press
track, or press
5
To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
• T he music streaming may be interrupted by
obstacles between the device and Soundbar, such
as wall, metallic casing that covers the device, or
other devices nearby that operate in the same
frequency.
• I f you want to connect your Soundbar with
another Bluetooth device, press and hold BT/PAIR
on the remote control to disconnect the currently
connected Bluetooth device.
AUX / OPTICAL / HDMI
ARC Operation
Ensure that the unit is connected to the TV or
audio device.
1
Press the
button repeatedly on the unit
or press the AUX, OPTICAL, HDMI ARC
buttons on the remote to select the desired
mode.
2
Operate your audio device directly for
playback features.
3
Press the VOL +/- buttons to adjust the
volume to your desired level.
/
to skip to a
to pause/resume play.
Advertisement
Table of Contents
