Wall Mount; Usb Operation - Philips HTL3320 User Manual

Tip
• W hile in OPTICAL/HDMI ARC mode, if there's
no sound output from the unit and the status
Indicator flashes, you may need to activate PCM or
Dolby Digital Signal output on your source device
(e.g. TV, DVD or Blu-ray player).

USB Operation

Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
1
Insert the USB device.
2
Press the Source button repeatedly on the
unit or press the USB button on the remote
control to select USB mode.
3
During playback:
Button Action
Start, pause or resume play.
/ Skip to the previous or next track.
Tip
• T he unit can support USB devices with up to 32
GB of memory.
• T his unit can play MP3 / WAV / WMA.
• S upport a USB port: 5V , 500mA.

5 Wall mount

Note
• I mproper wall mounting may result in accident,
injury or damage. If you have any query, contact
Consumer Care in your country.
• B efore wall mounting, make sure the wall can
support the weight of your Soundbar.
• B efore wall mount, you need not remove the
four rubber feet at the bottom of the Soundbar,
otherwise the rubber feet cannot be fixed back.
Screw length/diameter
Depending on the type of wall mounting your
Soundbar, make sure that you use screws of a
suitable length and diameter.
3.5-4mm
> 25 mm
See the illustration in the quick start guide on
how to wall mount the Soundbar.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the holes.
3) Hang the SoundBar on the fastening screws.
4mm
13