Prepare the Remote Control
•
The provided Remote Control allows the
unit to be operated from a distance.
•
Even if the Remote Control is operated
within the effective range 19.7 feet (6m),
remote control operation may be impossible
if there are any obstacles between the unit
and the remote control.
•
If the Remote Control is operated near
other products which generate infrared rays,
or if other remote control devices using
infra-red rays are used near the unit, it may
operate incorrectly Conversely the other
products may operate incorrectly
First-time use:
The unit has a
pre-installed lithium
CR2025 battery. Remove
the protective tab to
activate the remote
control battery.
Replace the Remote Control Battery
• The remote control requires a CR2025, 3V
Lithium battery
1
Push the tab on the side of the battery tray
towards the tray.
2
Now slide the battery tray out of the
remote control.
3
Remove the old battery Place a new
CR2025 battery into the battery tray with
the correct polarity (+/-) as indicated.
4
Slide the battery tray back into the slot in
the remote control
8
Precautions Concerning Batteries
•
When the Remote Control is not to be
used for a long time (more than a month),
remove the battery from the Remote
Control to prevent it from leaking.
•
If the batteries leak, wipe away the leakage
inside the battery compartment and replace
the batteries with new ones.
•
Do not use any batteries other than those
specified.
•
Do not heat or disassemble batteries.
•
Never throw them in fire or water
•
Do not carry or store batteries with other
metallic objects. Doing so could cause
batteries to short circuit, leak or explode.
•
Never recharge a battery unless it is
confirmed to be a rechargeable type.
Placement
Place the subwoofer at least 1 meter (3 feet)
away from your Soundbar, and ten centimeters
away from the wall.
For best results, place your subwoofer as shown
below.
10cm/4"
1m/3ft