Placement; Wall Mount - Philips TAB4208/37 User Manual

Table of Contents

Advertisement

Do not place the remote control on a
wet object.
Do not place the remote control under
direct sunlight or near sources of
excessive heat.
Remove the battery from the remote
control when not in use for a long
period of time, as corrosion or battery
leakage may occur and result in
physical injury, and/or property
damage, and/or �re.
Do not use any batteries other than
those speci�ed
Do not mix new batteries with old
ones.
Never recharge a battery unless it is
con�rmed to be a rechargeable type.

Placement

Place your soundbar as shown below.

Wall mount

Note
Improper wall mounting may result in accident,
injury or damage. If you have any query, contact
Consumer Care in your country.
Before wall mounting, make sure the wall can
support the weight of your soundbar.
Before wall mounting, you need not remove the
rubber feet at the bottom of the soundbar,
otherwise the rubber feet cannot be �xed back.
Depending on the type of wall mounting, make
sure that you use screws of a suitable length and
diameter.
Please check whether the USB port on the back of
the soundbar is connected to a USB device. If it is
found that the connected USB device affects the
wall-mount, you need to use another USB device
of the appropriate size.
Screw length/diameter
2.5-3.0mm/0.1-0.12"
>33mm/1.3"
Suggested wall mounting height
You are recommended to install the TV
�rst before wall mounting the soundbar.
With a TV preinstalled, wall mount the
soundbar 50mm/2.0'' in distance from
the bottom of the TV.
WARNING !
To prevent injury, this apparatus must be securely
attached to the �oor/wall in accordance with the
installation instructions.
Suggested wall mounting height:≤ 1.5 meters.
4mm/
0.16"
EN
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tab42084000 series

Table of Contents