Bluetooth Operation - Philips TAB4208/37 User Manual

Bluetooth operation

Through Bluetooth, connect the soundbar
with your Bluetooth device (such as an
iPad, iPhone, iPod touch, Android phone,
or laptop), and then you can listen to the
audio �les stored on the device through
your soundbar.
What you need
• A Bluetooth device which supports
Bluetooth pro�le A2DP, AVRCP and is
with Bluetooth version 5.0 + EDR.
• The maximum operational range
between the soundbar and a Bluetooth
device is approximately 10 meters (30
feet).
1
Press the button on the unit or
press Pair/BT button on the remote
control to switch the soundbar to
Bluetooth mode.
→ The [BT] indicator will blink.
2
On the Bluetooth device, switch
on Bluetooth, search for and select
Philips TAB4208 to start connection
(see the user manual of the Bluetooth
device on how to enable Bluetooth).
→ During connection, the [BT] indicator
will blink.
3
Wait until you hear the voice prompt
from the soundbar.
→ If successfully connected, the [BT]
indicator will light up solidly.
4
Select and play audio �les or music on
your Bluetooth device.
• During play, if a call comes in,
music play pauses. Play resumes
when the call ends.
• If your Bluetooth device supports
AVRCP pro�le, on the remote
control you can press
skip to a track, or press
pause/resume play.
5 To disconnect Bluetooth connection
and pair a new Bluetooth device：
→ Long press the Pair/BT button on
the remote control to disconnect
Bluetooth connection and enter
pairing mode.
Note
•
In an open space without obstructions，
the maximum operational range between
the soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
•
Compatibility with all Bluetooth devices is not
guaranteed.
•
The music streaming may be interrupted by
obstacles between the device and soundbar,
such as wall, metallic casing that covers the
device, or other devices nearby that operate in
the same frequency.
to
/
to
15
EN