Bluetooth Operation - Philips 8000 Series User Manual

» To turn on the AUTO upgrade
function, Press SETTINGS on RC,
press UP/DOWN to navigate till
"AUTO UPGRADE" item.
» Press RIGHT and display will
show "ACCEPT TERMS OF USE IN
MANUAL – PRESS PLAY"
» If end user has agreed, press PLAY
to turn on the function.
» Once it's turned on, TAB8967
will check if any new firmware
available from server at certain
time interval daily.
» If there's new firmware found,
TAB8967 will download and
upgrade the firmware when
TAB8967 is going to standby.
» Once TAB8967 is going to
standby, upgrading process
will start. Display will show
"UPDATING – KEEP POWER ON"
till upgrading has completed.
Bluetooth
®
Through Bluetooth, connect the
Soundbar with your Bluetooth device
(such as an iPad, iPhone, iPod touch,
Android phone, or laptop), and then you
can listen to the audio files stored on the
device through your Soundbar speakers.
1
Press the button for 3 seconds
repeatedly on the unit or on the
remote control to switch the
Soundbar to Bluetooth mode.
2
On the Bluetooth device, switch
on Bluetooth, search for and
select Philips TAB8967-xxxx to start
connection (see the user manual
of the Bluetooth device on how to
enable Bluetooth).
Operation
3
Wait until you hear the voice prompt
from the Soundbar.
» If the successfully connected, BT is
displayed on the display panel.
4
Select and play audio files or music
on your Bluetooth device.
During play, if a call is coming,
•
music play is paused. Play resumes
when the call ends.
If your Bluetooth device supports
•
AVRCP profile, on the remote
control you can press
skip to a track, or press
pause/resume play.
5
To exit Bluetooth, select other source.
When your switch back to
•
Bluetooth mode, Bluetooth
connection remains active.
If you want to connect your
•
Soundbar with another Bluetooth
device, press and hold
seconds on the remote control
to disconnect the currently
connected Bluetooth device.
Note
•
A Bluetooth device which supports Bluetooth
profile A2DP, AVRCP and with Bluetooth version
as 4.2 + EDR.
•
The maximum operational range between
the Soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
•
Compatibility with all Bluetooth devices is not
guaranteed.
•
The music streaming may be interrupted by
obstacles between the device and Soundbar,
such as wall, metallic casing that covers the
device, or other devices nearby that operate in
the same frequency.
/ to
to
for 8
27 EN