Philips 8000 Series User Manual page 22

3
Launch a music app on your Apple
device, then play music.
4
Click the AirPlay icon
5
In the pop up list, select Philips
TAB8967SB-xxxx speaker. Wait a
moment music will be casted to
speaker.
Note
•
If the ToU (Term of Use) is accepted, after
connection, the product may perform a
software update. Upgrade is required after
initial set up. Without the upgrade, not all
product features can be available.
•
When the first time set up is not successful,
hold down the Wi-Fi button on soundbar for 8
seconds until the Wi-Fi light is changed to slow
pulse. Reset the Wi-Fi connection, restart the
app and start the set up again.
•
If you want to change from one network to
another, you need to set up the connection
again. Press hold down the
on the soundbar for 8 seconds to reset the Wi-Fi
connection.
WPS mode
If your router has Wi-Fi Protected Setup
(WPS), you can set up the connection
without entering a password.
1
Press and hold the Wi-Fi button for 5
seconds. The Wi-Fi light will begin in
double blink.
2
Press the WPS button
on your router. The
button is normally
marked with this WPS
logo.
3
Wait for the Wi-Fi LED always turns
on.
EN 22
(Wi-Fi) button
WPS
Note
•
WPS is not a standard feature on all routers.
If your router does not have WPS then use
Standard Wi-Fi Setup.
•
Press the (Wi-Fi) button once if you want to
exit the WPS mode or it will automatically exit
after 2 minutes.