Philips 8000 Series User Manual page 34

manual of the device on how to
enable the function.
The device is not correctly connected.
•
Connect the device correctly.
The soundbar is already connected
•
with another Bluetooth device.
Disconnect the connected device,
then try again.
Quality of audio play from a connected
Bluetooth device is poor.
The Bluetooth reception is poor.
•
Move the device closer to the
soundbar, or remove any obstacle
between the device and the
soundbar.
I can't find the Bluetooth name of this
unit on my Bluetooth device
Ensure the Bluetooth function is
•
activated on your Bluetooth device.
Re-pair the unit with your Bluetooth
•
device.
Wi-Fi
Wi-Fi Connection cannot be established.
Check the availability of WLAN
•
network on the router.
Place the Wi-Fi router closer to the
•
unit.
Make sure the password is correct.
•
Check the WLAN function or reboot
•
the modem and Wi-Fi router.
Dolby Atmos
Cannot achieve outstanding Dolby Atmos
effects.
For non-HDMI connections (such as
•
use of USB, Bluetooth, OPTICAL or
AUDIO IN), limited height surround
effects are generated. See the section
of 'Dolby Atmos' about how to
achieve best Dolby Atmos effects.
EN 34
Remote control does not work
Before you press any playback
•
control button, first select the correct
source.
Reduce the distance between the
•
remote control and the unit.
Insert the battery with its polarities
•
(+/-) aligned as indicated.
Replace the battery.
•
Aim the remote control directly at
•
the sensor on the front of the unit.
This is a 15 mins power off
function, one of the ERPII
standard requirement for saving
power
When the unit's external input
•
signal level is too low, the unit will
be turned off automatically in 15
minutes. Please increase the volume
level of your external device.
The subwoofer is idle or the
indicator of subwoofer do not
light up
Please unplug power cord from the
•
mains sockect, and plug it in again
after 3 minutes.