Dolby Sound Mode; Factory Reset; Setup Menu - Philips 8000 Series User Manual

Dolby sound mode

Experience an immersive audio
experience with Dolby sound modes.
1
Press the (MENU) button on the
remote control to select UPMIX or
Standard mode.
UPMIX: Create a Dolby listening
•
experience.
Standard: Two-channel stereo
•
sound. Ideal for listening to
music.

Factory Reset

Reset device to default setting
Set is ON, press and hold the Vol+ and
Vol- buttons on the soundbar for 8
seconds until the soundbar display panel
shows " ". While system reboot,
RESET
soundbar display panel shows "

Setup Menu

The unit allows you to configure
advanced settings to provide you with an
even better experience.
1
Press the (MENU) button on the
remote control to open the menu.
2
Select the content with VOL+/
VOL- (Down / Up) on the remote
controller.
EN 24
".
REBOOT
3
4
Surround
•
•
Description
Display
Select Surround Effect
Adjust the Bass Level
B XX
Adjust the Treble Level
T XX
Set the Audio Delay
CT XX Adjust the Center Channel Gain
Adjust the Surround Left Channel
Gain
Adjust the Surround Right Channel
Gain
Set display brightness
dim
Auto turn off display
Activate the pairing function in
Bluetooth mode
BT PAIR
This item will only be displayed in Bluetooth
mode
MANUAL
Activate firmware upgrade
UPGRADE
ACCEPT TERMS OF USE IN MANUAL
AUTO
- PRESS PLAY(if 1st time switch from
UPGRADE
OFF to ON)
Change the initial values for each of
the settings with the cursors
(Left / Right).
To return to the previous screen/ exit
the settings, press
button is pressed within 10 seconds,
the system will automatically exit the
menu
Up-mixing : Dolby up-mixing
technology apply for audio channels
lesser than the 5.1.2 or 7.1.2 speaker
configuration.
STANDARD : The speaker output
follow the native channel
configuration of the content.
/
(Back). If no