Philips 8000 Series User Manual page 26

and start firmware upgrading
process.
If there is no new firmware found
in USB flash drive, Soundbar will
prompt end user to accept ToU
(Terms of Use) via local display
"ACCEPT TERMS OF USE IN USER
MANUAL - PRESS PLAY", if ToU
has not been accepted. If user
do not accept the ToU, software
upgrade over the network will
not take place.
If ToU has been accepted,
Soundbar will perform firmware
upgrade if a new firmware is
detected from the server.
If there is no new firmware found,
Soundbar will scroll current
firmware version once and
resume to normal operation.
During manual firmware
upgrading process, there are
downloading and flashing
processes.
Downloading process:
• TAB8967 can operate
normally.
• POWER key to enter semi
standby, downloading will
continue. Display should
keep displaying "UPDATING-
KEEP POWER ON". During
this stage, all local and RC
keys will have no effect
until firmware is upgraded
successfully.
• During semi standby, in case
downloading has failed due
to server or network issues,
TAB8967 should cancel the
downloading process and
stay in standby.
EN 26
• POWER key to enter ECO
standby will interrupt
downloading progress
and user needs to trigger
firmware upgrading
manually again.
Flashing firmware process :
• All local and RC keys will
have no effect.
• All current sources such as
C4A/Aiplay streaming, BT
streaming, HDMI In, Optical,
etc will stop its current
operation. This is to ensure
upgrading process will not
be interrupted.
• Keep displaying
"UPDATING-KEEP POWER
ON".
» Store the file into "/update/
data/" folder of the USB flash
drive. The firmware filename
should be "update_TAB8967_
Vxxxxx.zip". <xxxxx> is the
downloaded firmware version.
» TAB8967 is turned on.
» Plug in USB drive with the
downloaded firmware.
» Press SETTINGS on RC, press UP/
DOWN to navigate till "MANUAL
UPGRADE" item.
» Press RIGHT key will trigger
upgrading. Display will show
"UPDATING – KEEP POWER ON"
till upgrading has completed.
AUTO UPGRADE
» Before Auto upgrade is enabled,
end user needs to read and
accept the Terms of Use in
manual.