Table of Contents
Advertisement
5 Wall mount
Note
• Improper wall mounting may result in accident,
injury or damage. If you have any query,
contact Consumer Care in your country.
• Before wall mounting, make sure the wall can
support the weight of your soundbar.
Screw length/diameter
Depending on the type of wall mounting, make
sure that you use screws of a suitable length and
diameter.
3.0-3.5mm/0.12"-0.14"
>25mm/0.98"
See the illustration in the quick start guide on
how to wall mount the soundbar.
1)
Drill two holes on the wall.
2)
Secure the dowels and screws in the holes.
3)
Hang the soundbar on the fastening
screws.
4mm/
0.16"
6 Product
specifications
Note
• Specifications and design are subject to change
without notice.
Amplifier
•
RMS total output power:
30W RMS (+/- 0.5 dB, 10% THD)
•
Frequency response: 50 Hz-15 kHz /
±3 dB
•
Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
•
Total Harmonic Distortion: <1%
•
Input sensitivity:
•
LINE IN: 500 mV +/-50 mV
Bluetooth
•
Bluetooth profiles: A2DP, AVRCP
•
Bluetooth version: 4.2
•
Frequency band/Output power:
2402 - 2480 MHz / ≤ 20 dBm
Main unit
Soundbar
•
Power supply: 100-240 V ~ , 50/60 Hz
•
Power consumption: 15V/1.6A
•
Standby power consumption: ≤ 0.5 W
•
Dimensions (W x H x D):
900 x 65.5 x 91 mm
•
Weight: 1.53 kg
•
Driver: 2 x full range
(52 mm/2", 4 ohm)
Remote control batteries
•
2 x AAA-R03-1.5 V
EN
11
Advertisement
Table of Contents
