OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.
com.
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone
in receipt of this information.
ON CLEANING
Recommended Cleaning Chemicals
•
Isopropanol 70 %
•
Ethanol 70 %
•
Cidex
®
OPA
•
0.9 % NaCl solution
How to Use Cleaner
•
Prior to cleaning, turn off the Detector and remove the power cable.
•
Soak a soft cloth in a recommended cleaner, then lightly rub the screen with no more than 1 N of force.
•
The cleaner could cause serious damage if it leaks inside the Detector while cleaning.
•
Do not use benzene, thinner, acids or alkaline cleaners or other such solvents.
•
Cleaning guidelines for Detector must only be carried out by medical professionals (doctors or nurses) and
must not be handled by patients.
GENERAL DESCRIPTION
Overview
This model is an x-ray imaging device, a system that can acquire and process X-ray images as digital images. It
utilizes amorphous silicon and a high-performance scintillator to ensure sharp high-definition image quality
with the resolution of 3.6 lp/mm and the pixel pitches of 140 um. This device is a flat panel based X-ray image
acquisition device. This device must be used in conjunction with an operating PC and an X-ray Generator. This
device can be used for digitizing and transferring X-ray images for radiological diagnosis. The data transmission
between the Detector and PC can be enabled with a wired (cable) or wireless connection.
Product Component
•
Detector:
•
Control Box:
- AC power cord for Control Box
•
Battery Charger:
•
2 Battery (
)
•
AC Power adapter for Charger (
)
•
AC Power cord for AC Power adapter
•
Cable
- Main Cable: Detector and Control Box link cable (Supply DC power, Ethernet data, control signals of X-ray
Generator)
- Trigger Cable: X-ray Generator to Control Box, transmit control signal between Detector and X-ray
Generator. (Optional)
- LAN Cable: Control Box to PC, exchanges Ethernet data between PC and Detector. (Optional)
•
CD: Owner's Manual,
•
Regulatory Manual, Inspection Report
3