Table of Contents
Advertisement
15.4 Paper, Toner, and Waste Toner Replacement
The imagePRESS operator can maintain productivity by removing, replacing, and
refilling the paper, toner, and waste toner while the digital press is running.
The paper trays can also be opened and refilled during operation. The tray that is
being utilized by the digital press during production, however, will be locked. Once
the job completes, or the machine switches to another tray, the empty tray unlocks,
allowing the operator to prepare for the next job, and add more paper. No
productivity is affected and jobs finish quicker. The drawers will not always run dry
when switching.
Similar to the paper, the toner bottle may be removed and replaced while a job is
printing. The imagePRESS C6010 has a large toner hopper, making it possible for
the digital press to run much longer with no bottle. The operator is not required to
replace the bottle immediately after removing the old bottle. Therefore, productivity
and image quality are not affected, and jobs finish in the same amount of time.
Finally, the waste toner bottle is required to be replaced when filled. However, this
bottle may be removed while the digital press is running. Therefore, the operator
will remain productive, and not notice any changes in speed or quality.
16. Media Usage/Compatibility
The imagePRESS C6010 maintains reliable, predictable, and high-quality output.
Consistency of the output is dependent on knowing and compensating for
variables of a print job. The imagePRESS C6010 incorporates many control
systems which compensate for environmental and print process conditions.
Another variable is the print media. Knowing the characteristics of the media
guarantees optimal print output.
Version 2
imagePRESS C6010 Customer Expectations Document
Page 61
Advertisement
Table of Contents
