Kenwood Eco Power VC2799 Manual page 4

Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
EN
DO NOT THROW AWAY THESE INSTRUCTIONS
Using for the first time:
- Make sure that all air suction intakes (e.g., the suction pipe) are not clogged in any way and clean
if necessary before switching on the appliance.
- Make sure that all filters and the dust container have been fitted correctly (see the "maintenance
and cleaning" section).
DESCRIPTION OF THE APPLIANCE (Fig. 1)
A
Carry handle
B
Cover release lever
C
Wheel
D
Switch 0-1 (on/off)
E
Cord rewinder switch
F
Dust level indicator
G
Power intensity control
H
Adjustment lever
I
Dust and crevice attachment
HOW TO USE THE VACUUM CLEANER
- Press the end of the coupling into the opening until it clicks into place.
- Push the adaptor on the end of the hose into the cleaner until it clicks into place (1 - Fig. 2).
- To remove it, first unplug the cleaner and then press the buttons on each side (2 - Fig. 2) and
remove the coupling.
- Unwind the cord for its full length and plug the appliance into a mains power socket .
- To rewind the cord, press the rewinder button and at the same time, guide the cord into the
appliance.
- Insert the end of the telescopic tube into the hose coupling.
- Adjust the tube length using the lever on the side of the tube and following the direction of the
arrow to reduce or increase the length.
- Choose your required attachment and fix it to the end of the tube.
IMPORTANT: Control (G) serves to regulate suction power and as a result, to adjust noise
from a minimum to a maximum.
Floor brush (L), upholstery (M) and crevice (I) attachments
- The floor brush can be used for hard floors and carpets. It has two wheels so that it can slide 360
degrees over all surfaces. It is also possible to select the required bristle projection by pressing a
lever at the end of the brush (3 - Fig. 3).
- The dust/crevice and upholstery attachments need to be stored with care.
- Use the crevice attachment to clean small spaces such as behind radiators or small gaps and
corners, for example. If the dusting tool is used, this attachment is also useful for removing dust
from smooth and also uneven surfaces.
L
Floor brush
M Upholstery attachment
N
Parquet brush
O
Dust container
P
Dust container filter
Q
Dust container cover
R
Telescopic extension
S
Coupling
- 2 -

Advertisement

Table of Contents
loading

Table of Contents