Kenwood Eco Power VC2799 Manual page 6

EN
Cleaning the vacuum cleaner
The casing, dust container and filter seats can be wiped with a damp cloth if necessary. No liquid
must enter the vacuum cleaner in the process. Never use heavy-duty cleaning substances (stain
removers, thinners) because they can corrode the plastic surfaces. Only put the plug back into the
mains socket when you are sure that all parts are thoroughly dry.
IMPORTANT: Do not lubricate or oil any rotating parts, since this could cause dirt and fluff to stick
even further
Cleaning the brushes
While the appliance is switched on, move your hand between the bristles on the brush to free them
of any trapped dust, which will then be sucked into the cleaner.
SERVICE AND CUSTOMER ASSISTANCE
In case of damage to the power cord of other parts of the appliance, please contact an Kenwood
authorised assistance service.
For assistance and repairs (under or post guarantee), please contact your local authorised Kenwood
assistance centre.
IMPORTANT: The serial number of the appliance can be found on its rating plate.
- 4 -