When The Oven Is Working - AEG MCD4538E User Manual

Food
Quiches and
Pies
Hamburgers
Oven chips
VERY IMPORTANT
NOTES:
 As the browning plate has a Teflon
layer, if you use it incorrectly, it
can be damaged.
 Never cut the food on the plate.
Remove the food from the plate
prior to cutting.
11.

WHEN THE OVEN IS WORKING...

11.1.
cycle
In both cases:
1.
Microwave emission is stopped
immediately.
2.
The grill is de-activated but is still
very hot. Danger of burning!
3.
The timer stops and the display
shows the remaining amount of
operating time.
If you wish, at this time you can:
1.
Turn or stir the food to ensure it will
be evenly cooked
2.
Change the process parameters,
3.
Cancel the process by pressing the
Cancel key.
4.
To restart the process, close the
door and press the Start key.
Altering parameters
11.2.
The operating parameters (time,
power, temperature) can be altered
when the oven is operating or when
Cooking
Weight
Time
7 – 8 min
400 g
3 – 4 min
200 g
300 g 5 - 6 min
150 - 8 - 10 min
200
400 g 6 -8 min
Interrupting a cooking
Standing Time
---
2 – 3 min
2 – 3 min
5 – 8 min
---
10.2.
The best way to clean the browning
plate is to wash it with hot water and
detergent and rinse off with clean
water. Do not use a scrubbing brush or
a hard sponge otherwise the top layer
will be damaged.
the cooking process has been
interrupted by proceeding as follows:
1.
Select the parameter to be change
with the Parameter selection keys.
The respective symbol and the
display start blinking.
2.
Set the desired value with the Plus
and Minus keys.
3.
Press the Confirmation key or wait
3 seconds to validate the new
parameter value. The display and
symbols stop blinking.
Cancelling a cooking cycle
11.3.
If you wish to cancel the cooking
process, press the Cancel key twice.
You will then hear a beep and the time
will appear on the display.
End of a cooking cycle
11.4.
At the end of the process you will hear
three beeps and the display will show
the word End .
ENGLISH
Recommendation
Turn 2 x
Turn 1 x
Cleaning:
26