When Scanning A Document One Page At A Time (Non Separation Mode); Loading Passports - Canon imageFORMULA DR-C230 User Manual

When scanning a document one page
at a time (non separation mode)
When scanning a thick document one page at a time or scanning a
document that has multiple pages fastened together, set the feed
selection lever to Bypass mode. This enables the placed document to
be scanned without the pages being separated, regardless of the
number of pages.
1
Set the feed selection lever to Bypass mode.
2
Place the document as described in the
multiple documents" procedure
IMPORTANT
• When scanning multiple page documents that are fastened
together, such as invoices, place the documents so that the
edge that is fastened together is facing down.
• If double-feeding occurs, press the scanner's DFR button to
continue the scan, or clear the [Detect by Ultrasonic] check box
in the [Feeding] tab on the scanner driver settings screen.
p. 34)
"Scanning
on p. 26.
(See
28

Loading passports

To scan a passport, insert the passport into the separately sold carrier
sheet (for passports) and then place it onto the scanner.
1
Set the Feed Selection Lever to Bypass Mode.
CAUTION
When scanning passports, make sure to set the Feed Selection
Lever to Bypass Mode.
2
Open the page of the passport that you want to scan and
insert it into the carrier sheet.