Placing Folded Documents - Canon imageFORMULA DR-C230 User Manual

CAUTION
• Place the cards one at a time.
• When scanning cards, place them to be fed horizontally. If you
place cards to be fed vertically, they may not be ejected properly,
and cards that get jammed may be damaged when you remove
them.
• When scanning cards, clear the [Detect by Ultrasonic] check box in
the [Feeding] tab on the scanner driver settings screen.
Hint
In such a case, set the feed selection lever to Normal mode before
scanning.

Placing Folded Documents

Folio Scan enables you to scan documents that are larger than LTR/
A4 and therefore do not fit in the feeder. To use the function, fold the
document in half lengthwise and place it into the feeder. The scanner
will scan both sides and combine the scanned images into a single
image.
1
Sets the scanning conditions.
2
Set the feed selection lever to Bypass mode.
(See p. 34)
3
Fold the document in half.
Crease the document firmly down its center to fold the
document in half. Fold the document so that its edges are
neatly aligned. If the document is not folded properly, paper
jams may occur or distortions may appear in the combined
scanned image.
IMPORTANT
A portion of the scanned image will be missing at the fold line.
30