Disassembly And Assembly Instructions - Panasonic EH-HW11 Service Manual

4 Disassembly and Assembly Instructions

4.1. Disassembly Instructions
1. Remove Shaft Cover from Main Body by Slotted screw-
driver(Minus driver).
2. Remove Torx screws at Shaft position by Phillips screw-
driver(Plus driver).
3. Push Shaft out by tiny-shaped Phillips screwdrivers (Plus
driver) and pull it out from the main body.
4. Remove Pivot spring by gripping and pulling it out from
the Main body.
5. Remove 6 Screws for fitting Press plate side by Phillips
screwdrivers(Plus driver).
6. Press plate cover at the Hook part by Slotted screwdriver
(Minus driver), as shown in Figure below.
5