Disassembly And Assembly Instructions - Panasonic EH-HV20 Service Manual

4 Disassembly and Assembly instructions

4.1 Disassembly instruction
(1) Remove Hinge Cover from Main Body
by Slotted screw driver (Minus Driver.)
Hinge Cover
Minus Driver
(2) Remove Hinge Pin by hand pressing at
Housing side and Press Plate side.
Press Plate
Housing
(3) Remove Pivot spring by gripping
and pulling it out from the Main body
Hinge Pin
Pivot Spring
(4) Remove 3 screws for fitting Press Plate side
by Phillips screw drivers (Plus Driver).
Screws
(5) Remove Press Plate Cover from Press Plate
in Grip follow as below drawing.
Press Plate Cover
(6) Take off Iron Plate from Press Plate.
Press Plate