Panasonic AJ-UPX360ED Operating Instructions Manual page 89

(Factory setting: [ON])
[EYE SENSOR]
Sets sensitivity of the eye sensor.
The items that can be set are as follows.
f [HIGH], [LOW]
(Factory setting: [HIGH])
[LCD/VF HDR]
Sets the output image from the LCD monitor and viewfinder.
[SDR]
[HDR]
(Factory setting: [HDR])
@
NOTE
t The setting is fixed to [SDR] when set to following menu.
‑ [SYSTEM] menu → [REC FORMAT] → [480-59.94i/AVCHD SA]
‑ [SYSTEM] menu → [REC FORMAT] → [576-50.00i/AVCHD SA]
t When the [SCENE FILE] menu → [GAMMA MODE SEL] is set to anything other than [HLG], the camera image is output in the standard dynamic
range.
t This cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[LCD/VF V-Log]
Sets the output image from the LCD monitor and viewfinder when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[V‑Log]
[V-709]
(Factory setting: [V-Log])
@
NOTE
t The setting is fixed to [V-709] when set to the following menu.
‑ [SYSTEM] menu → [REC FORMAT] → [480-59.94i/AVCHD SA]
‑ [SYSTEM] menu → [REC FORMAT] → [576-50.00i/AVCHD SA]
t This cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [NORMAL].
[INDICATOR]
Selects the indicator to display in the output image.
[FULL AUTO]
Displays/hides the status when the <AUTO/MANUAL> switch is at <AUTO>.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[SLOT1/2 STATUS]
Displays/hides the status of the card slot and remaining recording capacity.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[2 SLOTS FUNC.]
Displays/hides the setting in the [RECORDING] menu → [2 SLOTS FUNC.].
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[STREAMING]
Displays/hides the streaming status.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[NETWORK]
Displays/hides the wireless LAN and wired LAN connection status.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
Chapter 4 Operation — Menu settings
Outputs in the standard dynamic range.
Outputs in the high dynamic range.
Outputs in same color as the recording image.
Outputs in a converted color equivalent to standard CINE-LIKE. Setting suitable for a preview.
– 89 –