Ide Devices - Acer Aspire T180 Service Manual

Parameter
Halt On
Base Memory, Extended
Memory, and Total Memory

IDE Devices

IDE HDD Auto-Detection
IDE Channel 0 Master
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
Parameter
IDE HDD Auto-Detection
Access Mode(Auto)
29
This item defines the operation of the system
POST(Power On Self Test) routine. You can use
this item to select which types of errors in the
POST are sufficient to halt the system.
Total based and extended memory, and I/O ROM
384KB available to the system.
Phoenix-Award WorkstationBIOS CMOS Setup Utility
IDE Channel 0 Master
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
Press <Enter> while this item is highlighted to
prompt the Setup Utility to automatically detect
and configure an IDE device on the IDE channel.
This item defines ways that can be used to
access IDE hard disks such as LBA(Large Block
Addressing). Leave this value at Auto and the
system will automatically decide the fastest way
to access the hard disk drive.
Description
[Press Enter]
[Auto]
Menu Level
[Auto]
To auto-detect the
HDD's size, head... on
80 GB
this channel
38309
16
0
38308
255
F7:Optimized Defaults
Description
Options
All, But Keyboard
total memory of the system.
Item Help
Options
Chapter 2