Epson XP-300 Start Here

Start Here
© 2012 Seiko Epson Corporation. All rights reserved.
Printed in XXXXXX
Contents may vary by location.
Unpacking
1
!
Cautions must be followed carefully to avoid bodily injury.
Q
Do not open the ink cartridge package until you are ready to install it in the
printer. The cartridge is vacuum packed to maintain its reliability.
Remove all protective materials.
A
Turning On
2
Connect and plug in.
Q
Installing the Ink
Cartridges
For the initial setup, make sure you use the ink cartridges that came with this printer. These cartridges cannot be saved
for later use. The initial ink cartridges will be partly used to charge the print head. These cartridges may print fewer
pages compared to subsequent ink cartridges.
3
A B
Open. Shake all new cartridges and then unpack.
D
Insert all four cartridges. Press each one until it clicks.
B C
Turn on. Select a language.
C
Remove only the yellow tape.
E F
Close. Press.