Table of Contents
Advertisement
Chapter 3
Overview
The Acer family of server and system remote management cards can be accessed from
anywhere on your Intranet through an Internet browser. This is a great way to maintain
your critical server when you are nowhere near it.
This chapter explains how to locate your ARMC card on your local network.
Locating Your ARMC Card
In order to configure your ARMC card completely, you must access the ARMC from
another system on the same network. This document refers to this other system as a client
system. To do this, you must know the ARMC card's IP address. If you have installed the
ARMC on a network that uses DHCP, you can search the network for the ARMC card.
To locate and find out its IP address, you must install and run RMseek.
Note:
To get or set the IP address on your ARMC card in a Windows 2000/XP environment,
you can also run the RMConfigApp program on the host system. See Appendix B,
WinCuri, LinCuri, and RMConfigApp for more information on how to use the
RMConfigApp program.
Follow the steps in the table below to run RMseek:
Step
Description
1
On a local network computer, place the ARMC CD into the CD-ROM drive. Locate the RMseek program
on your ARMC CD Disc. It is located in the following directory:
CDROM\RemoteTools\Win32\RMseek.exe
Run the RMseek program by double left clicking on it.
2
Left click on the Next button when you see this screen.
Locating Your ARMC Card
RMSeek.exe
Chapter Three : Locating Your ARMC Card
Cont'd
27
Advertisement
Table of Contents
