Sharp DV-NC200SS Service Manual page 119

STEP START-
/LOC. ING
No. No.
[29] [28] TR Gear Spring
[30] [29] TR Gear A/B
FF Arm ( HI )
[31] [31]
Idler Assembly ( HI )
[32] [26]
[33] [26] BT Arm
Loading Arm ( SP )
[34] [26]
Assembly
Loading Arm ( TU )
[35] [34]
Assembly
M Brake ( TU )
[16] , [26]
[36]
Assembly ( HI )
M Brake ( SP )
[2] , [26]
[37]
Assembly ( HI )
Tension Lever
[38] [37]
Assembly
[39] [38] T Lever Holder
M Gear ( HI )
[40] [40]
[15] , [40] Sensor Gear ( HI )
[41]
[36] , [40] Reel T
[42]
[43] [38] Reel S
Moving Guide S
[34] , [38] Preparation
[44]
Moving Guide T
[45] [35]
Preparation
[46] [19] TG Post Assembly
[47] [27] Rack Assembly
[48] [47] F Door Opener
[49] [49] Cleaner Assembly
[50] [49] CL Post
(1) (2)
(1): Follow steps in sequence. When reassembling, follow the steps in reverse order.
These numbers are also used as identification (location) No. of parts in the figures.
(2): Indicates the part to start disassembling with in order to disassemble the part in column (1).
(3): Name of the part
(4): Location of the part: T=Top B=Bottom R=Right L=Left
(5): Figure Number
(6): Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered.
P=Spring, W=Washer, C=Cut Washer, S=Screw, *=Unhook, Unlock, Release, Unplug, or Desolder
e.g., 2(L-2) = two Locking Tabs (L-2).
(7): Adjustment Information for Installation
(+):Refer to Deck Exploded Views for lubrication.
PART
B DM13H-1
B DM13H-1
B DM1H , DM14H
B DM1H , DM14H
B DM2H , DM14H
B DM2H , DM14H
B DM2H , DM14H
T DM1H , DM15H
T DM1H , DM15H
T DM1H , DM15H
T DM15H
T DM1H , DM15H
T DM1H , DM15H
T DM1H , DM15H
T DM1H , DM15H
T DM1H , DM16H
T DM1H , DM16H
T DM1H , DM16H
R DM17H
R DM17H
T DM1H , DM6H
T DM6H
(3) (4)
REMOVAL
REMOVE/*UNHOOK/
Fig. No. UNLOCK/RELEASE/
UNPLUG/DESOLDER
* ( L-9 )
* ( P-5 )
* ( P-6 )
* ( L-10 )
( C-6 )
( C-7 )
( S-11 ), Slide Plate
* ( L-11 )
* ( L-12 )
(5) (6)
2-4-2
INSTALLATION
ADJUSTMENT
CONDITION
( + ) Refer to Alignment
Sec.Page 2-5-1
( + ) Refer to Alignment
Sec.Page 2-5-1
( + ) Refer to Alignment
Sec.Page 2-5-1
(7)
H9941DA