Receive Data; Native Epg - LG STB-6500 Installation Manual

IP
• P:C IP Setting
- Server Address is set to IP Address.
- Can select IPv4 or IPv6 type using 'IP Type' . (Depending on model)
(IP Address)
(Port Number)
- Server Address is set to Domain Name.
(Domain Name)
(Port Number)
- The default value of IP(IPv4) is 0 and the range is between 0 and 255.
- The default value of IP(IPv6) is 0 and the range is between 0 and FFFF.
- The default value of Port is 0 and the range is between 0 and 65535.

Receive Data

(Depending on model)
• Sets Enable or Disable.

Native EPG

(Depending on model)
• When Pro:Centric Mode is set to 'Off' or 'Configuration Only' , 'Native EPG' is forced to be 'Enable' and unable to change.
• When set to 'Enable' , You can use the TV Guide Application.
Set IPv4 or IPv6 address.
Sets the actual port or number where the Pro:Centric server is running.
Sets the domain name where the Pro:Centric server is running.
Sets the actual port or number where the Pro:Centric server is running.
27