Related Publications; Product Family; Delivery Check; Nameplate - ABB ACS 600 Hardware Manual

Chapter 1 – Introduction

Related Publications

Product Family

Delivery Check

Nameplate

Type Code

Frame Size

1-2
In addition to this manual the ACx 601/604/607 AC drive user
documentation includes the following publications:
• ACx 601 or ACx 604/607 Hardware Manual
• ACx 600 Firmware Manual
• ACx 600 DriveWindow User's Manual (optional)
• Several Option Module Manuals
• ACx 600 Technical Catalog
• ACx 600 Converter Module Installation In User Defined Cabinet
The ACx 600 product family of three phase AC drives includes
• the ACx 600 (for most applications)
• the ACC 600 (for crane drive applications)
• the ACx 600 MultiDrive (for multi drive applications)
The application programs are introduced in Appendix – A.
Study this manual carefully before installing, commissioning, operating
or servicing the drive. We expect that you have a basic knowledge of
physical and electrical fundamentals, electrical wiring practices,
electrical components and electrical schematic symbols.
Check that there are no signs of damage. Before attempting installation
and operation, check the information on the drive nameplate to verify
that the unit is the correct model.
Each ACx 600 has a nameplate for identification purposes. See Figure
1-1. The nameplate data includes a type code and a serial number
which allow individual recognition of each unit.
The ACx 600 Type Code contains information on the properties and
configuration of the drive. The Type Code Chart explains the
significance of each digit or character in the Type Code.
ACx 600 drives are manufactured in several different chassis sizes that
are designated as Frame R2, R3, etc. Drives of several different ratings
are manufactured in the same frame. The ACx 600 rating tables on
page A-1 in Appendix A list the Frame Size used for each Type Code.
The Frame Size is not marked on the nameplate.
601/604/607 US Supplement