Advertisement
Setting up the TV set for the fi rst time
TV panel must be facing downwards.
1
Fitting the stand
For the stand installation, there is one type of screw
provided as shown below.
To complete the stand installation you will require a
cross head screw driver.
Place the TV set on a fl at and clean surface with the
panel facing downwards to avoid damage.
4 x
1
Used for attaching the stand
Place the TV set on a fl at and clean surface with
to the TV set (fi g.2)
the panel facing downwards to avoid damage.
2
Connecting your set
1) Connect the TV to your power socket.
2) If you wish to use the TV to receive Freeview/Saorview channels,
connect the RF input from the TV to your outdoor Digital TV aerial.
If you do not wish to receive Freeview/Saorview, skip this step.
4
First time installation
1
Screen 1
When you first turn on the set, you will be welcomed by the First Time Installation screen as
shown above.
Language: Select your preferred on-screen display language. This will change the language in
which the menus and associated information is displayed in. When the setup has been com-
pleted, this can be changed by selecting Menu > Settings > Language.
To obtain a copy of your Operating Instructions, please go to: www.umc-uk.co.uk/instruction-manuals/sharp
Back/Shortest
Front/Longest
2
When the stand feet are installed correctly the
stand feet will be longest at the front of the TV
and shortest at the back with the feet pointing
away from each other.
3 Powering On the TV
TV Control Stick
TV control stick
Switch on the television by pressing
the TV control stick located on the
TV set.
2
Screen 2
Tuning Mode: Select what you wish to tune via TV's built-in tuner. You can choose from Freeview
TV, Analogue TV and ALL (Freeview + Analogue). At the next step, the set will tune in selected
option.
Country: Select the correct country in which the set will be used in. This will enable the TV to cor-
rectly install the functions applicable in the country of use.
Environment: Use this option to select either Home or Store mode.
HOME MODE is a power saving mode which reduces the energy used by up to 25% (by reducing
the power to the LED/LCD panel).
When in STORE MODE the picture will be brighter. An on-screen banner showing the sets func-
tionality will appear on the screen after 2 minutes.
Note: In Home Mode, the TV will switch itself to the standby mode after 4 hours in the event that
the buttons on the remote control or TV are not used.
1
2
4 x
3
When the stand/feet are in the correct position, secure
the feet to the underside of the TV set using 4 screws
provided.
Remote Control: Installing Batteries
Insert the batteries supplied into the remote
control and press the standby button to
power on the TV.
3
4
Wall Mounting the TV
1. Remove the four screws that are supplied
in the wall mounting holes.
2. The wall mount can now be easily
attached to the mounting holes on
the rear of the TV.
3. Install the wall mounting bracket to the
television as advised by the bracket
manufacturer.
The picture shows the use of spacers, which
are not applicable to all sets/installations.
Image for illustration only.
Connectivity
1
2 (ARC)
C
D
DIGITAL
ETHERNET
AUDIO OUT
OPTICAL
L
R
VIDEO/Y
A
B
E
A
Ethernet/LAN*
Network connection
B
Digital Audio
Digital Optical Audio Output
C
HDMI 1
HDMI input
D
HDMI 2
HDMI input (ARC)
E
Audio shared for Video/Composite
L/R
HDMI input (ARC)
and component/ YPbPr
F
Video Input (green) and HD input
Video/YPbPr
HD input (YPbPr)
(Ypbpr)
G
SCART
SCART input
* The Ethernet/LAN port is used for Freeview HD services
SCART
G
Pb
Pr
F
H
RF in
RF / TV aerial input
I
HDMI 3
HDMI input
J
Earphones
Earphone input
K
Service Input
Input is used only by service centres
L
CI card in
Common interface module
M
USB 2.0
USB port 2.0
Advertisement
