Page 1
GX-BT9 PORTABLE BLUETOOTH BOOMBOX OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. PORTABLE MUSIC BOOMBOX GX-BT9 REMOTE...
Page 2
Special notes Warning: Changes or modifications to this unit not expressly For users in U.S. approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION FCC Radiation Exposure Statement RISK OF ELECTRIC This device complies with the limits for a Class B digital device, SHOCK DO NOT OPEN pursuant to Part 15 of the FCC Rules.
Important Safety Instructions Electricity is used to perform many useful functions, but it can To prevent fire or shock hazard, do not expose this appli- also cause personal injuries and property damage if improperly ance to dripping or splashing. No objects filled with liquids, handled.
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.
Using this product with a higher voltage other than 4” (10 cm) that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not PORTABLE MUSIC BOOMBOX GX-BT9 REMOTE...
Batteries (battery pack or batteries installed) shall not be Fully charge an external device with AC power before exposed to excessive heat such as sunshine, fire or the like. using GX-BT9 battery operation. ■ Bluetooth standby mode 1 Disconnect the AC and DC power cord, and remove the battery compartment cover.
Remote control Carrying the unit Caution: ■ Battery installation Before transporting the unit, remove all connection from the unit. Then, set the unit to the standby mode. Transporting the unit with any device left connected might Use 2 “AAA” size batteries (UM/SUM-4, R3, HP-16 or damage the unit.
General control PORTABLE MUSIC BOOMBOX GX-BT9 REMOTE SENSOR ■ Auto power off function ■ To turn the power on The main unit will enter the standby mode after 15 minutes Press the ON/STANDBY button to turn the power on. of inactivity during: Audio In: No detection of input signal.
Page 11
Android 4.1, Jelly Bean and higher. For device with a lower Android version, refer the ● operation manual of the device for recommended app (application). NFC detection PORTABLE MUSIC BOOMBOX GX-BT9 REMOTE SENSOR area area on the A Bluetooth audio main unit source device (smartphone/tablet).
GX-BT9 supports Bluetooth profile AVRCP 1.4. If your de- ● vice supports the same profile (refer to device manufactur- er’s specification), GX-BT9 is able to control the volume of the device. Note: Some music applications do not support this feature, hence...
Page 13
Listening to Bluetooth enabled devices (continued) ■ Listening to the sound ■ To disconnect the Bluetooth device Perform any of the followings. Check that: - Disconnect the Bluetooth connection on the audio source The source device Bluetooth functionality is ON. ●...
Listening on Android™ devices ■ Introduction : Open Accessory ■ Android device playback Open Accessory support allows external USB hardware Press the ON/STANDBY button to turn the power on. (an Android USB accessory) to interact with an Android- Press the USB / button on the main unit or the powered device in a special accessory mode.
Fully charge the iPod or iPhone with AC power before Incoming calls will pause the playback. using GX-BT9 battery operation. Once the calls are answered, the conversation can only The message “This accessory is not made to work with be heard through the built-in iPhone speaker.
2 Disconnect USB memory device from the USB terminal. Notes: ● SHARP will not be held liable for the loss of data while the USB memory device is connected to the audio system. ● Files compressed in MP3 and/or WMA format can be played back when connected to the USB terminal.
Advanced USB playback Notes: ■ Repeat play During the program operation, random play is not possible. ● If you press the ON/STANDBY button to enter the Bluetooth Repeat play can play one track, all tracks or a programmed ● standby mode or change the function from the USB to sequence continuously.
Store the stations in memory, in order, starting with preset channel 1. 4 Within 30 seconds, press the MEMORY button to store that PORTABLE MUSIC BOOMBOX GX-BT9 REMOTE SENSOR station in memory. If the “MEM” indicator and preset number disappear before the station is memorized, repeat the operation from step 2.
Connecting other equipment The connection cord is not included. Purchase a commercially ■ Echo control (Karaoke) available cord as shown below. Toggle the echo level with ECHO or ECHO button. ■ Connecting a guitar / microphone ECHO OFF ..ECHO 08 Caution: Be careful not to connect a bass guitar as it might damage this Notes:...
■ Listening to the playback sounds of calling a service technician. portable audio player, etc. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service center. ■ General Symptom Possible cause When a button is ...
Page 21
Troubleshooting chart (continued) ■ Open Accessory ■ Condensation Sudden temperature changes, storage or operation in an Symptom Possible cause extremely humid environment may cause condensation ● No sound is ● The device is not playing. inside the cabinet or on the transmitter on the remote produced.
WMA (64 ~ 160 kbps) Specifications Other Maximum total number of MP3/WMA As part of our policy of continuous improvement, SHARP reserves files is 65025. Maximum total number of folders is the right to make design and specification changes for product 999 INCLUSIVE of root directory.